不同數字印模技術對3D打印模型精度的影響
發布時間：2019-04-27 03:26
【摘要】：目的:結合3D打印樹脂模型評價2種椅旁掃描系統的掃描精度。方法:仿照上頜牙弓形態及大小制作一金屬底座主模型,底座上設計4個柱形金屬預備體,分別模擬上頜尖牙和第一磨牙的預備體,右側尖牙和第一磨牙分別以A、B表示,左側分別以C、D表示。分別利用Cerec藍光照相系統和Cerec真彩攝像系統掃描主模型各10次,每次掃描生成一個數字化模型。用3D打印機打印出樹脂模型(n=10),在三坐標測量機上分別測量主模型和樹脂模型相應柱形金屬預備體間的距離AB、AC、BD以及A的直徑d。采用SPSS 13.0軟件對測量結果進行統計分析。結果:藍光組AB、AC、BD的距離,真彩組AC、BD的距離分別與主模型差異有顯著性(P0.05);藍光組與真彩組各距離差異均有顯著性(P0.05)。2組的d值與主模型差異無顯著性(P0.05)。結論:對單個預備體的掃描,Cerec藍光照相系統精度高于Cerec真彩攝像系統;當掃描區域擴大,Cerec真彩攝像系統精度高于Cerec藍光照相系統。
[Abstract]:Objective: to evaluate the scanning accuracy of two kinds of seat-side scanning system based on 3D printing resin model. Methods: the main model of a metal base was made by imitating the shape and size of the maxillary arch. Four cylindrical metal preparations were designed on the base to simulate the preparation of maxillary canines and first molars respectively, and the right fangs and first molars were expressed as A, B, respectively. The left side is expressed as C, D, respectively. Cerec blue-ray camera system and Cerec real-color camera system were used to scan the main model 10 times each time to generate a digital model each time. The resin model was printed out with a 3D printer. The distance between the main model and the resin model was measured on the coordinate measuring machine (CMM). The distance between the main model and the resin model corresponding to the cylindrical metal preform AB,AC,BD and the diameter d of A were measured on the CMM. The measurement results were statistically analyzed by SPSS 13.0 software. Results: the distance of AB,AC,BD in blue ray group and AC,BD in true color group were significantly different from that of main model (P0.05). There were significant differences in each distance between blue light group and true color group (P0.05), and there was no significant difference between the two groups in d value and main model (P0.05). Conclusion: the precision of Cerec Blu-ray photography system is higher than that of Cerec real-color camera system, and when the scanning area is enlarged, the accuracy of Cerec real-color camera system is higher than that of Cerec blue-ray photography system.
【作者單位】： 河北醫科大學口腔醫學院·河北省口腔醫學重點實驗室;河北省秦皇島市海港醫院;
【基金】：河北省科技支撐計劃項目(編號:13277766D) 河北省衛生計生委醫學科學研究重點課題指導計劃(編號:20150815)
【分類號】：R783.2
本文編號：2466653
[Abstract]:Objective: to evaluate the scanning accuracy of two kinds of seat-side scanning system based on 3D printing resin model. Methods: the main model of a metal base was made by imitating the shape and size of the maxillary arch. Four cylindrical metal preparations were designed on the base to simulate the preparation of maxillary canines and first molars respectively, and the right fangs and first molars were expressed as A, B, respectively. The left side is expressed as C, D, respectively. Cerec blue-ray camera system and Cerec real-color camera system were used to scan the main model 10 times each time to generate a digital model each time. The resin model was printed out with a 3D printer. The distance between the main model and the resin model was measured on the coordinate measuring machine (CMM). The distance between the main model and the resin model corresponding to the cylindrical metal preform AB,AC,BD and the diameter d of A were measured on the CMM. The measurement results were statistically analyzed by SPSS 13.0 software. Results: the distance of AB,AC,BD in blue ray group and AC,BD in true color group were significantly different from that of main model (P0.05). There were significant differences in each distance between blue light group and true color group (P0.05), and there was no significant difference between the two groups in d value and main model (P0.05). Conclusion: the precision of Cerec Blu-ray photography system is higher than that of Cerec real-color camera system, and when the scanning area is enlarged, the accuracy of Cerec real-color camera system is higher than that of Cerec blue-ray photography system.
【作者單位】： 河北醫科大學口腔醫學院·河北省口腔醫學重點實驗室;河北省秦皇島市海港醫院;
【基金】：河北省科技支撐計劃項目(編號:13277766D) 河北省衛生計生委醫學科學研究重點課題指導計劃(編號:20150815)
【分類號】：R783.2
【相似文獻】
相關期刊論文 前2條
1 蘇庭舒;孫健;;口內數字化印模技術[J];中華臨床醫師雜志(電子版);2012年19期
2 ;[J];;年期
相關碩士學位論文 前1條
1 蘇庭舒;基于口內數字化印模的掃描重復性和固定橋適合性研究[D];上海交通大學;2014年
，本文編號：2466653
本文鏈接：http://sikaile.net/yixuelunwen/kouq/2466653.html
最近更新
教材專著
