【摘要】：目的探索錐形束CT(CBCT)對牙體長度各參數測量的可行性及準確性。方法通過InVivoDental軟件對40例患者109顆活體牙的CBCT掃描數據進行組織分割以及重建,得到目標牙長軸的頰舌向斷層圖像,測量根長、冠長和牙體全長。相同活體牙經外科拔除后,進行相應參數測量。比較實體測量值和CBCT測量值的差異,檢驗CBCT測量牙體長度的精確性。結果實驗牙根長、冠長及牙體全長的CBCT測量值與實體測量值的差異無統計學意義(P值分別為0.790、0.621、0.657),兩種測量方法差值的95%可信區間分別為(-1.10~1.13)、(-1.00~0.96)、(-1.00~1.05)mm。結論 CBCT對活體牙的根長、冠長及牙體全長的無創測量與實體測量的一致性較好,可在臨床推廣應用。
[Abstract]:Objective to explore the feasibility and accuracy of conical beam CT (CBCT) in measuring the parameters of tooth length. Methods InVivoDental software was used to segment and reconstruct the CBCT scanning data of 109 living teeth of 40 patients. The buccal and lingual tomograms of the long axis of the target teeth were obtained, and the root length, crown length and the total length of the tooth were measured. The parameters of the same living teeth were measured after surgical extraction. To compare the difference between the measured values of solid and CBCT, and to test the accuracy of the measurement of tooth length by CBCT. Results there was no significant difference between the measured CBCT values of root length, crown length and total length of teeth (P = 0.790), and the 95% confidence interval of the difference between the two methods was (-1.101.13). (-1.00), (-1.00), (1.05) mm. Conclusion the noninvasive measurement of root length, crown length and total length of tooth by CBCT is in good agreement with solid measurement, and can be widely used in clinic.
【作者單位】： 重慶醫科大學附屬口腔醫院口腔頜面外科;口腔疾病與生物醫學重慶市重點實驗室;重慶醫科大學附屬口腔醫院大學城門診部;口腔疾病研究國家重點實驗室華西口腔醫院唇腭裂外科(四川大學);
【基金】：重慶市科學技術委員會基金資助項目(cstc2013jcyjA10010)
【分類號】：R816.98

【共引文獻】

相關期刊論文 前9條

1 沈月騰;胡露露;宋錦t，

本文編號：2379468