發布時間：2018-04-18 23:13

  本文選題：LED大屏幕顯示 + 恒流輸出��； 參考：《電子科技大學》2010年碩士論文

【摘要】： 隨著科技的進步和電子技術的不斷發展,人們對大屏幕顯示的要求也逐漸提高,普通的通用電源驅動芯片已遠遠不能滿足要求。LED顯示屏作為一種高科技的電子產品逐步引起人們的重視,它已廣泛地應用于電信、郵政、金融、交通、體育場館和戶外廣告等各個行業及政府工作部門。與此同時,人們對LED的顯示屏的要求也向大屏幕、高均勻性、高畫面品質、長壽命的方向發展,因此,一種多通道、輸出電流高度精確的LED專用驅動芯片就成為研究的重點。 本文詳細的介紹了一種帶有保護功能的16通道LED專用恒流驅動控制芯片的設計,以及幾個功能模塊和性能指標的仿真驗證。該芯片設計所要求的工作電壓范圍為3.3V-5V,各通道的輸出電流范圍為3mA-60mA,而且輸出電流大小精確可調,時鐘頻率達25MHz,以滿足大量數據的傳輸要求。設計中的電路包括SDI輸入端口模塊,SDO輸出端口模塊,基準電壓模塊,電流調節模塊,過溫保護模塊,輸出級模塊等不同的模塊電路。 本文是基于0.35um混合信號CMOS工藝,運用Cadence工作平臺,對各模塊電路進行了仿真驗證,并在此基礎上對整體電路進行了聯合功能仿真驗證和測試分析。芯片內部的輸出電流誤差小于3%,芯片之間的輸出電流誤差小于6%,它相比以往常用的16通道LED恒流驅動器,有更優的輸出電流調節精度以及更高的電流匹配精度,同時還擁有較小的芯片面積,在工業生產中可以極大提高芯片產量并大大降低單位芯片的生產成本。
[Abstract]:With the progress of science and technology and the development of electronic technology, people's demand for large screen display has been gradually raised.As a high-tech electronic product, the common universal power driver chip has been far from being able to meet the requirements. As a high-tech electronic product, it has been widely used in telecommunications, postal, finance and transportation.Sports venues and outdoor advertising and other industries and government departments.At the same time, the demand for LED display screen is also developing towards the direction of large screen, high uniformity, high picture quality and long life. Therefore, a kind of multi-channel, high-precision LED driver chip with high output current becomes the focus of research.This paper introduces in detail the design of a 16-channel LED special constant-current drive control chip with protection function, as well as the simulation verification of several functional modules and performance indexes.The working voltage range of the chip is 3.3V-5V, the output current range of each channel is 3mA-60mA. the output current can be adjusted accurately and the clock frequency can reach 25MHz to meet the requirement of large amount of data transmission.The circuits in the design include SDI input port module, reference voltage module, current regulation module, over-temperature protection module, output stage module and so on.This paper is based on the 0.35um mixed signal CMOS process, using the Cadence working platform, the simulation of each module circuit is verified, and on this basis, the whole circuit is verified and tested by the joint function simulation and analysis.The output current error within the chip is less than 3 and the output current error between the chips is less than 6. Compared with the 16-channel LED constant current driver, it has better output current regulation accuracy and higher current matching accuracy.At the same time, it also has a small chip area, which can greatly increase the chip output and greatly reduce the production cost of the unit chip in industrial production.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2010
【分類號】：TN312.8

【參考文獻】

相關期刊論文 前7條

1 楊銀堂,賀斌,朱樟明;CMOS斬波穩定放大器的分析與研究[J];電子器件;2005年01期

2 譚春玲;常昌遠;鄒一照;;一種BiCMOS過溫保護電路[J];電子器件;2006年02期

3 劉簾曦,楊銀堂,朱樟明;一種基于斬波調制的低壓高精度CMOS帶隙基準源[J];固體電子學研究與進展;2005年03期

4 朱國軍;唐新偉;李肇基;;一種帶熱滯回功能的過熱保護電路[J];微電子學;2006年01期

5 游軼雄,劉正,徐永晉,王健;一種CMOS過熱保護電路[J];上海大學學報(自然科學版);2002年04期

6 王興君;屈寶鵬;董紅;;LDO中過溫保護電路的設計[J];現代電子技術;2006年03期

7 劉振豐;馮全源;;電源管理芯片低壓低功耗過熱保護電路[J];西南交通大學學報;2006年03期

，

本文編號：1770510