【摘要】：The purpose of the study is to investigate the distribution of stress at metal-resin, and the relatien ship between the stress and configuration of metal surface, setting tenperature , thermocycling, kind and quantity of resin material and extrapressure. a set of Digaital Strain Indicator was used in the study the samples were prepared according to the situations of clinical restorations and abutment teeth. The following main conclusions can be drawn: (1) For the resin mass unrestrained the stress concentrates on the sharp margin of it ,while the stress of metal-resin interface fakes place along tha long axile of samples,but for the rounded samples there is no difference whether at central or at margin points. (2) The stress of convex metal surface composited with resin is much lower (153.45MPa)than that of concave surface (17.16MPa). (3) The depth and the protrusive angle of a cavity have a positive relationship with interface stress ,but the width and the concave angle have a negafive one. (4) Anong the three treatment methods of metal surface, the stress of metal-resin interface roughened by lost crystal salt is higher than that of sandlasting and control groups .But affer thermocycling, the result shows that thefomer has a surper resistance to the change of temperature. (5) The round interface of metal-resin has a higher stress than that of the opened in those stright line samples. (6) For the resin of samples set at a higher enviroment temperature, thein(?)interfaces appear to have a much higher stress than that set at a normal temperature. (7) The extrapressure can frozen partial stress on the mefal-resin
【學位授予單位】：第四軍醫大學
【學位級別】：博士
【學位授予年份】：1989
【分類號】：R783.3
【圖文】：

圖工I一3

【參考文獻】

相關期刊論文 前10條

1 張武;羅建;季鐵正;藍立文;林德寬;;顯微激光分析儀及其在高分子中的應用[J];西北工業大學學報;1989年02期

2 趙云鳳;光彈性應力分析在口腔修復學研究中的應用[J];國外醫學.口腔醫學分冊;1989年01期

3 巢永烈,陳思婭,王小蓉;金屬翼板粘結橋脫落的原因分析[J];華西口腔醫學雜志;1988年04期

4 于欣毅,徐君伍;金屬翼板粘結橋金屬樹脂界面粘結強度的研究[J];臨床口腔醫學雜志;1988年02期

5 李子?xùn)|;;濕氣和水分對膠粘界面的影響[J];粘接;1987年05期

6 劉生福;;熱分析技術在膠粘劑研究中的應用[J];粘接;1987年04期

7 周定沛;;粘接配位鍵機理的實驗研究(二)——環氧膠對金屬的粘接[J];粘接;1987年04期

8 蔡武峰;;幾種環氧膠膠接接頭耐久性試驗[J];粘接;1987年03期

9 顧先穩;;硬質合金表面處理方法及其對粘接強度的影響[J];粘接;1987年02期

10 周定沛;;粘接配位鍵機理的實驗研究(一)[J];粘接;1987年01期

本文編號：2804601