【摘要】：目的:比較和分析Vita Mark II與2種全瓷系統飾瓷的結合強度。方法:將Vita Mark II瓷塊切割成8 mm×6 mm×2 mm試件20個,隨機分成2組(n=10),分別在其表面燒結飾瓷VM9和Titankeramik,用萬能試驗機測定剪切強度,掃描電鏡(SEM)觀察結合界面的形貌和構象,熱場發射掃描電鏡(FE-SEM)對結合界面進行元素定性分析。結果:VM9組和Titankeramik組剪切強度(MPa)分別為:36.92±7.6和41.02±9.40(P0.05);各組試件破壞模式均以基底瓷破壞為主,SEM觀察顯示2種飾瓷材料在界面區與Mark II瓷塊鑲嵌融合,結合緊密無間隙。FE-SEM分析表明界面區Al元素質量分?jǐn)?shù)呈梯度變化,由基底瓷向飾面瓷Al的質量分?jǐn)?shù)逐漸下降,提示基底瓷中Al有越過界面相互滲透的現象。結論:VM9和Titankeramik飾瓷與Vita mark II的結合強度均能滿足臨床需要。
[Abstract]:Objective: to compare and analyze the bonding strength between Vita Mark II and two kinds of all-ceramic system ornaments. Methods: 20 Vita Mark II porcelain pieces were cut into 8 mm 脳 6 mm 脳 2 mm specimens and randomly divided into two groups (n 鈮，

本文編號：2511407