用三維空間標記法測量口腔印模材料的體積變化率
發布時間:2018-10-31 10:08
【摘要】:目的:使用三維標記法測定4種常用印模材體積變化率.方法:每種印模材在金屬母模上制取3份試件后使用形狀輪廓掃描儀掃描及建模,通過專用軟件在試件模型上劃出標記空間,并測量不同存放時間標記空間內體積,計算試件的體積變化率.結果:CAVEX藻酸鹽在15、180 min時體積變化率分別為1.432%、8.343%;Zhermark藻酸鹽在15、180 min時體積變化率分別為1.772%、7.580%;Express XT Penta H硅橡膠在1、36 h體積變化率分別為0.047%、0.364%;Impregum Penta聚醚橡膠在1、36 h體積變化率分別為0.012%、0.336%.2種藻酸鹽體積變化率間無統計學差異(P0.05),2種人工合成橡膠體積變化率間的差值無統計學意義(P0.05),藻酸鹽與人工合成橡膠體積變化率間差值具有統計學意義(P0.01).結論:藻酸鹽類印模材體積變化率大于人工合成橡膠類印模材;三維空間標記法適用于印模試件形變的直接測量.
[Abstract]:Objective: to determine the volume change rate of four kinds of commonly used impression materials by three-dimensional labeling method. Methods: three samples were made on the metal master mold, then the shape contour scanner was used to scan and model the samples. The marking space was marked out by special software, and the volume of the marking space was measured at different storage times. Calculate the volume change rate of the specimen. Results: the volume change rates of CAVEX alginate at 15180 min were 1.432and 8.343, respectively. The volume change rates of CAVEX alginate at 15180 min were 1.772and 7.580, respectively. The volume change rates of Express XT Penta H silicone rubber at 1 ~ 36 h were 0.047 and 0.364, respectively. The volume change rates of Impregum Penta polyether rubber at 1 h were 0.012 and 0.336.2, respectively. There was no significant difference between the volume change rates of alginate (P0.05). The difference between the volume change rate of two synthetic rubber was not statistically significant (P0.05), the difference between alginate and synthetic rubber volume change rate was statistically significant (P0.01). Conclusion: the volume change rate of alginate impression is larger than that of synthetic rubber.
【作者單位】: 暨南大學醫學院口腔系;
【基金】:廣東省自然科學基金項目(31912)
【分類號】:R783.1
本文編號:2301779
[Abstract]:Objective: to determine the volume change rate of four kinds of commonly used impression materials by three-dimensional labeling method. Methods: three samples were made on the metal master mold, then the shape contour scanner was used to scan and model the samples. The marking space was marked out by special software, and the volume of the marking space was measured at different storage times. Calculate the volume change rate of the specimen. Results: the volume change rates of CAVEX alginate at 15180 min were 1.432and 8.343, respectively. The volume change rates of CAVEX alginate at 15180 min were 1.772and 7.580, respectively. The volume change rates of Express XT Penta H silicone rubber at 1 ~ 36 h were 0.047 and 0.364, respectively. The volume change rates of Impregum Penta polyether rubber at 1 h were 0.012 and 0.336.2, respectively. There was no significant difference between the volume change rates of alginate (P0.05). The difference between the volume change rate of two synthetic rubber was not statistically significant (P0.05), the difference between alginate and synthetic rubber volume change rate was statistically significant (P0.01). Conclusion: the volume change rate of alginate impression is larger than that of synthetic rubber.
【作者單位】: 暨南大學醫學院口腔系;
【基金】:廣東省自然科學基金項目(31912)
【分類號】:R783.1
【共引文獻】
相關碩士學位論文 前2條
1 彭春;多基線數字近景攝影測量技術在齒科石膏模型三維成像和測量中的應用[D];重慶醫科大學;2013年
2 王薇;應用三維數字模型分析法評價硅橡膠兩種印模方法的清晰度[D];安徽醫科大學;2014年
【相似文獻】
相關期刊論文 前10條
1 趙圓宇;楊正偉;;睪丸、附睪和眼球在乙醇內長期保存后的密度與體積變化[J];川北醫學院學報;2007年01期
2 藍玉玲;馮林春;路娜;解傳濱;王運來;蔡博寧;;鼻咽癌患者螺旋斷層放療中靶區及腮腺體積變化[J];解放軍醫學院學報;2013年02期
3 聶翔;李金高;;鼻咽癌磁共振彌散加權成像與放療療效的相關性研究[J];實用癌癥雜志;2011年06期
4 ;[J];;年期
5 ;[J];;年期
6 ;[J];;年期
7 ;[J];;年期
8 ;[J];;年期
9 ;[J];;年期
10 ;[J];;年期
,本文編號:2301779
本文鏈接:http://sikaile.net/yixuelunwen/kouq/2301779.html
最近更新
教材專著