本文選題：種植體 + 多孔�。� 參考：《口腔醫學研究》2017年09期

【摘要】：目的:根據現有普通種植體的幾何參數,設計分區式多孔結構種植體進行拓?fù)鋬?yōu)化,并通過有限元方法分析有無多孔、不同孔形以及不同位置的種植體在下頜骨模型中的應力分布,比較其優劣勢。方法:通過"六維齒科牙種植設計軟件"確定幾何參數并UG建模;在有限元軟件中模擬咬合力加載,分析4種種植體在最大力、適合力下的應力分布。結果:4種不同種植體的應力分布有較大差異,正菱形交錯排布多孔種植體應力分布明顯小于其它3組。結論:對于種植體修復,合適的多孔結構種植體在力學性能上比現有的普通實心種植體更具優勢。
[Abstract]:Objective: according to the geometric parameters of the existing ordinary implants, we designed the segmented porous implants for topology optimization, and analyzed whether there were holes in the implants by finite element method. The stress distribution of implants with different foramen and different positions in mandibular model was compared. Methods: the geometric parameters were determined by the "six dimensional dental implant design software" and the UG model was established, and the stress distribution of the four implants under the most powerful and suitable force was analyzed by simulating the bite force loading in the finite element software. Results the stress distribution of the four different implants was different, and the stress distribution of the normal rhombic interlaced porous implants was obviously smaller than that of the other three groups. Conclusion: suitable porous implants have better mechanical properties than existing solid implants.
【作者單位】： 浙江工業大學特種裝備制造與先進加工技術教育部/浙江省重點實驗室;
【基金】：國家自然科學基金(編號:51375453)
【分類號】：R783.6
，

本文編號：2085843