不同樹脂材料對纖維樹脂樁核修復微滲漏的影響
本文選題:纖維增強復合樹脂樁 + 樁核; 參考:《西安交通大學學報(醫學版)》2017年04期
【摘要】:目的探究不同的樹脂材料在樁核修復中對微滲漏程度的影響。方法對46顆經過根管治療的單根離體牙根,分別使用纖維樁加ParaCore雙固化流動樹脂、可樂麗菲露AP-X光固化復合樹脂以及Ceramage聚合瓷行纖維樹脂樁核修復,采用根管內直接成型-直接粘接或根管外間接成型-再粘接的方法,通過染色透明化法,觀察不同纖維樹脂樁核修復后的微滲漏情況。結果ParaCore+根管內直接成型-直接粘接法制作的樁核微滲漏最嚴重[(4.94±1.71)mm],ParaCore+間接成型-再粘接法[(0.91±0.33)mm]、AP-X+間接成型-再粘接法[(0.87±0.27)mm]、Ceramage+間接成型-再粘接法[(1.02±0.34)mm]微滲漏值較低。結論不同樹脂材料對纖維樹脂樁核修復體的微滲漏情況無明顯影響,但不同的制作及粘接方法對樁核修復體的微滲漏程度有顯著影響。
[Abstract]:Objective to investigate the effect of different resin materials on microleakage in post-core restoration. Methods 46 isolated roots treated with root canal were repaired with fiber post and ParaCore double-curable flow resin, claliferol AP-X light-cured composite resin and Ceramage polymerized porcelain respectively. The microleakage of different fiber resin post and core was observed by the method of direct moulding in root canal, direct bonding or indirect molding and rebonding outside root canal, and the dyeing transparency method was used to observe the microleakage after repairing with different fiber resin post core. Results the microleakage of post core made by direct formation-direct bonding method in ParaCore root canal was the most serious [4.94 鹵1.71)mm] Para Core indirect moulding and rebonding method [0.91 鹵0.33)mm] AP-X indirect moulding and rebonding method [0.87 鹵0.27)mm] Ceramage indirect moulding and rebonding method [1.02 鹵0.34)mm] microleakage value was lower. Conclusion different resin materials have no significant effect on the microleakage of fiber resin post core restoration, but different fabrication and bonding methods have a significant effect on the microleakage degree of the post core restoration.
【作者單位】: 清華大學醫學中心;解放軍口腔醫學研究所;四川大學華西口腔醫院;
【分類號】:R781.05
【相似文獻】
相關期刊論文 前10條
1 呂川;胡軍;;口腔修復體微滲漏的檢測方法[J];口腔醫學;2007年10期
2 白雪;伊哲;姜志清;;不同厚度材料封閉冠方根管的微滲漏對比研究[J];口腔頜面修復學雜志;2013年01期
3 張琳;馬雪;朱澌潔;牛玉梅;劉會梅;李季;;固化光源光照方向和角度對微滲漏影響的研究[J];口腔醫學研究;2013年10期
4 傅柏平;鉭壁處與齦壁處的微滲漏的比較——濕潤粘接技術修復V類洞洞型[J];口腔醫學;1999年02期
5 嚴暉;連文偉;;樁冠微滲漏研究進展[J];中國實用口腔科雜志;2008年12期
6 安雪銀;王成坤;陳路;;微滲漏發生原因及其常用檢測方法的研究進展[J];吉林大學學報(醫學版);2013年06期
7 李季;李艷萍;牛玉梅;;光照角度對牙體與充填材料間微滲漏影響的研究[J];口腔醫學研究;2011年03期
8 王青,李再仁,鄭宗范,凌滌生;四種牙體修復材料體外充填微滲漏的實驗研究[J];口腔材料器械雜志;1995年04期
9 桂和明;微滲漏的形成與預防[J];廣東牙病防治;1996年01期
10 熊亞芳;王彤權;田荷花;;表面處理對全瓷冠修復體微滲漏的影響[J];臨床口腔醫學雜志;2007年07期
相關會議論文 前6條
1 李季;李艷萍;牛玉梅;;固化光源光照角度對牙體與充填材料間微滲漏影響的研究[A];全國第八次牙體牙髓病學學術會議論文匯編[C];2011年
2 高燕;楊金玲;呂陶紅;莊沛林;凌均h,
本文編號:1889901
本文鏈接:http://sikaile.net/yixuelunwen/kouq/1889901.html