本文選題：混合陶瓷 + 粘接��； 參考：《南昌大學》2017年碩士論文

【摘要】：目的通過對混合陶瓷表面不同的處理方法,研究其對臨床上常用的粘接劑的粘接強度的影響。方法本實驗選用Vita Enamic混合瓷塊,用CAD/CAM方法切割成10×10×3mm試件78塊,根據表面處理方法,隨機分為6組,每組12個試件:A組:對照組;B組:噴砂處理;C組:酸蝕組;D組:硅烷處理組;E組:酸蝕+硅烷處理;F組:噴砂+硅烷處理。每一組12個試件又隨機分為兩小組,每組6個試件,其中第1組用于樹脂粘接劑組,第2小組用于玻璃離子組。將單面透明膠帶打一半徑2mm的圓孔,貼在試件的處理面上。然后分別用Embrace TM雙固化樹脂粘接劑和Fuji-1玻璃離子粘固劑,在每個試件處理表面,制作粘接面半徑2mm,高4mm的圓柱體,靜止24h后用電子萬能力學測試機(Instron2343型,USA)測試每個試件的粘接強度。結果在測試刀頭進率為0.5mm/min的條件下,各組的粘接強度(MPa)分別為Embrace TM雙固化樹脂粘接劑組:A1組:6.2199±0.9662、B1組:8.3043±1.2074、C1組:7.2266±1.1112、D1組:15.0703±1.1033、E1組:9.6446±1.1725、F1組:13.1765±2.312;Fuji-Ⅰ玻璃離子粘固劑組:A2組:2.45±0.30、B2組:3.40±0.57、C2組:4.99±0.42、D2組:2.19±0.31、E2組:3.91±0.39、F2組:2.52±0.98。結論酸蝕、噴砂、涂硅烷偶聯劑,單獨或聯合對混合陶瓷表面處理,均可提高其與樹脂粘接劑的粘接強度,其中硅烷偶聯劑增強樹脂粘接強度最好,噴砂效果優于酸蝕;酸蝕和噴砂處理可提高其與玻璃離子粘接劑粘接強度,其中酸蝕組效果優于噴砂處理組,涂硅烷偶聯劑非但不提高玻璃離子粘接劑的粘接強度,反而損害了二者之間的粘接強度。
[Abstract]:Objective to study the effect of mixed ceramic surface treatment on the bonding strength of common adhesives. Methods 78 Vita Enamic mixed porcelain pieces were cut into 10 脳 10 脳 3mm samples by CAD/CAM. According to the surface treatment method, they were randomly divided into 6 groups. There were 12 samples in each group: control group B group: sand blasting group C group: acid etching group D group: silane treatment group E group: acid etching silane treatment group F group: sand blasting silane treatment group. Each group of 12 specimens were randomly divided into two groups, each group of 6 specimens, the first group for resin adhesive group, group 2 for glass ion group. One-sided transparent tape is taped into a circular hole with radius of 2mm and affixed to the treatment surface of the specimen. Then using Embrace TM double curing resin binder and Fuji-1 glass ion binder respectively, the cylinder with 2 mm radius of bonding surface and high 4mm was made on the surface of each specimen. The bonding strength of each specimen was measured by electronic universal mechanical tester instrument 2343 after 24 hours of rest. 緇撴灉鍦ㄦ祴璇曞垁澶磋繘鐜囦負0.5mm/min鐨勬潯浠朵笅,鍚勭粍鐨勭矘鎺ュ己搴，

本文編號：1885252