本文選題：控制 + LED��； 參考：《鄭州大學》2011年碩士論文

【摘要】：LED顯示屏是一種以通過控制半導體二極管的亮滅為顯示方式的顯示屏,可用來顯示圖形、圖像、文字、動畫、視頻和錄像信號等各種信息。在信息大爆炸的今天,LED顯示的應用得到了前所未有的發展,從街頭大型的廣告屏幕到室內精美的LED照明燈,甚至手表、手機和電腦等和我們息息相關的電器產品也廣泛應用了LED顯示屏,其充斥于我們生活的角角落落,同時也美化和方便著我們生活的方方面面。 LED顯示屏控制卡又稱LED顯示屏控制系統、LED顯示屏控制器,它是組成LED顯示屏的核心器件,主要用來接受來自計算機串行口等的畫面和顯示信息,并置入存儲器,按照分區的驅動方式生產LED顯示屏能夠識別的顯示數據和控制時序。本文中作者基于ARM芯片LPC1765設計并實現了LED顯示屏控制卡,并在此基礎上對諸如行列滾動和漢字的顯示等功能進行了調試。 ARM芯片在作為控制卡的核心部件方面有著諸多優點,本文首先對芯片的選擇進行了分析,之后設計了功能實現中所需要的各個模塊,如信號的行控制、列控制、串口和中斷系統等,并完成了實物卡的制作,最后是在Keil MDK上對下位機程序的編寫、仿真和調試,效果比較滿意。
[Abstract]:Led display screen is a display screen which can display graphics, images, text, animation, video and video signals by controlling the brightness of semiconductor diodes. In the information explosion today, the application of LED display has been unprecedented, from large advertising screens on the street to beautiful LED lights and even watches. Mobile phones and computers, and other electrical products that are closely related to us, are also widely used in LED display screens, which fill the corners of our lives. At the same time, it beautifies and facilitates all aspects of our life. The LED display control card is also called the LED display control system and LED display controller, which is the core component of the LED display. It is mainly used to receive pictures and display information from computer serial ports and put them into memory to produce display data and control time sequence which LED display can recognize according to the drive mode of partition. In this paper, based on arm chip LPC1765, the design and implementation of LED display control card, On this basis, the functions such as column rolling and Chinese character display are debugged. Arm chip has many advantages as the core component of the control card. Then every module is designed, such as line control of signal, column control, serial port and interrupt system, etc. Finally, the program of lower computer is written, simulated and debugged on Keil MDK. The effect is satisfactory.
【學位授予單位】：鄭州大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TN873

【引證文獻】

相關期刊論文 前1條

1 徐振;時維鐸;;數碼管的使用研究總結[J];科技視界;2012年25期

相關碩士學位論文 前2條

1 侯娟;雙通道高壓輸電線路電磁輻射測量系統設計與實現[D];鄭州大學;2012年

2 閆家欣;固井工程新型多功能施工參數計量?jī)x的研究[D];東北石油大學;2012年

，

本文編號：2080597