本文選題：薯渣 + 壓縮成型��； 參考：《農機化研究》2017年03期

【摘要】：馬鈴薯渣松散、密度低、水分高,不利于回收利用,因此將其壓縮成較高密度的成型物料塊是解決上述問題的有效途徑。傳統的薯渣壓縮設備需要先去除水分,再進行壓縮。本文根據馬鈴薯渣的壓縮特性,研制了一種高效方便的脫水、壓縮同時完成的閉式薯渣壓縮試驗裝置,且優化了薯渣壓縮裝置。同時,對關鍵部件進行了受力分析,并進行了樣機的試制。結果表明:設計的薯渣壓縮試驗裝置效率高,證明了此壓縮試驗裝置設計的可行性。
[Abstract]:Potato dregs are loose, low density and high moisture content, which is not good for recycling. Therefore, it is an effective way to solve the above problems by compressing potato dregs into high density moulding blocks. Traditional potato dregs compression equipment needs to remove moisture and then compress. According to the compression characteristics of potato dregs, a kind of high efficient and convenient dewatering and compressing device was developed, and the compression device of potato residue was optimized. At the same time, the force of the key components is analyzed, and the prototype is trial-produced. The results show that the efficiency of the designed compression test device is high, which proves the feasibility of the design of the compression test device.
【作者單位】： 內蒙古農業大學機電工程學院;株洲硬質合金集團有限公司;
【基金】：內蒙古自治區自然科學基金項目(2014BS0319) 內蒙古農業大學博士科研啟動基金項目(BJ09-21)
【分類號】：X792
，

本文編號：1994626