本文選題：單機排序　切入點：學習和惡化效應　出處：《沈陽師范大學》2017年碩士論文

【摘要】：傳統的排序模型通常沒有將工件的實際加工時間與加工位置之間的關系研究在內。但是,在生產生活過程中,例如學習效應和惡化效應的諸多因素都會影響工件的實際加工時間。同時,考慮加工過程中帶有交貨期窗口、送出時間以及安裝時間的現實問題也極為必要。本文討論了兩類不同目標函數的排序問題,同時帶有學習效應和惡化效應,具體內容概述如下:第一章簡單陳述了關于帶有學習效應和惡化效應問題的研究現狀。第二章討論了單機帶有送出時間和非線性安裝時間的排序問題。工件的實際加工時間與其所排位置和開始時間相關。工件的安裝時間和送出時間滿足p-s-d形式,即安裝時間受工件的加工位置以及已加工完成工件的實際加工時間影響。所考慮的問題包括:最大完工時間問題、總完工時間問題、加權完工時間問題、完工時間?次方之和以及最大延誤時間問題。分別給出上述問題的最優排序規則。第三章討論了單機帶有可拒絕以及工期窗口的排序問題。工件的實際加工時間考慮了工件的學習效應和惡化效應。每個工件或者被拒絕,或者被接受。被拒絕就要支付拒絕的費用。所有被接受的工件都有同樣大小的交貨期窗口。能否在窗口內完工的工件決定了提前或延誤懲罰是否產生。研究了兩個函數。第一個函數為目標費用函數,與窗口的開始時間、窗口的大小、提前時間、延誤時間、最大完工時間以及拒絕費用有關。第二個問題的目標費用函數,與窗口的開始時間、窗口的大小、提前和延誤的工件數、最大完工時間以及拒絕費用有關。給出了問題的多項式時間算法。
[Abstract]:The traditional sorting model usually does not study the relationship between the actual processing time and the position of the workpiece.However, in the process of production and life, such as learning effect and deterioration effect, many factors will affect the actual processing time of the workpiece.At the same time, it is necessary to consider the practical problems of delivery time, delivery time and installation time.In this paper, we discuss two kinds of scheduling problems of different objective functions, including learning effect and deterioration effect. The specific contents are summarized as follows: in chapter one, we briefly describe the research status of the problem with learning effect and deterioration effect.In chapter 2, we discuss the scheduling problem of single machine with send out time and nonlinear installation time.The actual processing time of the workpiece is related to the position and start time of the workpiece.The installation time and the sending time of the workpiece meet the p-s-d form, that is, the installation time is affected by the machining position of the workpiece and the actual processing time of the finished workpiece.The questions to be considered include the maximum completion time, the total completion time, the weighted completion time, and the completion time.The sum of power and the problem of maximum delay time.The optimal sorting rules of the above problems are given respectively.In chapter 3, the scheduling problem of single machine with rejection and duration window is discussed.The actual processing time of the workpiece takes into account the learning effect and the deterioration effect of the workpiece.Each artifact is either rejected or accepted.If you are refused, you will have to pay for it.All accepted artifacts have a delivery window of the same size.Whether the workpiece can be completed in the window determines whether early or delay punishment occurs.Two functions are studied.The first function is the target cost function, which is related to the window start time, window size, lead time, delay time, maximum completion time and rejection cost.The target cost function of the second question is related to the start time of the window, the size of the window, the number of jobs in advance and delay, the maximum completion time, and the rejection cost.The polynomial time algorithm of the problem is given.
【學位授予單位】：沈陽師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：O223

【參考文獻】

相關期刊論文 前3條

1 金亭;趙傳立;;帶有學習效應和退化效應的可拒絕排序問題[J];沈陽師范大學學報(自然科學版);2015年03期

2 陳東;趙傳立;;帶有交貨期窗口和工件可拒絕的單機排序問題[J];重慶師范大學學報(自然科學版);2013年06期

3 ;The single-machine scheduling problems with deteriorating jobs and learning effect[J];Journal of Zhejiang University Science A(Science in Engineering);2006年04期

，

本文編號：1717430