【摘要】：在光譜檢測技術中所采用的光譜范圍通常在紫外-可見光波段,同時要求該光源能夠輸出連續、穩定且光強較強的光,一般的單一光源很難滿足這個要求.通常鹵鎢燈在可見光波段能很好的滿足光譜檢測分析,但在紫外波段無法滿足要求.鑒于此,紫外LED燈可以彌補鹵鎢燈在紫外波段光強較弱的缺陷.為了實現紫外-可見光-近紅外復合光源的設計,采用恒壓輸出驅動不同功率紫外LED燈,實現光譜光強的均勻性,最終設計成功一款小型紫外-可見光-近紅外復合光源.
[Abstract]:The spectral range used in the spectral detection technology is usually in the ultraviolet-visible band. At the same time, it is required that the light source can output continuous, stable and intense light, so it is difficult to satisfy this requirement by a single light source. Usually the halogen tungsten lamp can satisfy the spectral analysis well in the visible band, but it can not meet the requirement in the ultraviolet band. In view of this, UV LED lamp can make up for the weak light intensity of halogen tungsten lamp in UV band. In order to realize the design of ultraviolet-visible-near infrared composite light source, constant voltage output was used to drive different power UV-LED lamp to achieve the uniformity of spectral intensity. Finally, a small UV-visible-near infrared composite light source was designed successfully.
【作者單位】： 浙江工業大學理學院;
【分類號】：O433.4

【相似文獻】

相關期刊論文 前10條

1 方福波;王W毢，

本文編號：2469713