【摘要】：產品生產過程的質量管理問題日趨嚴重,落后的質量信息采集方式,傳統的質量控制理念,低效的檢驗響應和調度模式已經無法滿足新的產品生產質量管理需求;而IETM技術在質量信息管理方面具有管理規范、交互性好等先天優勢;因此,利用IETM技術進行生產過程質量信息管理技術研究具有重要意義。本文以某企業產品主要零部件檢驗過程為研究對象,從企業和用戶關心的產品檢驗流程角度出發進行系統開發,利用IETM相關技術解決了產品生產過程中原始質量信息采集、檢驗狀態顯示、質量信息管理等問題,具體研究?jī)?nèi)容如下:1、明確質量信息管理的主要內容,根據軟件開發流程,梳理本文系統內部信息流程,分析用戶需求,創建質量信息管理體系,并在此基礎上對系統各個功能模塊進行了規劃和介紹。2、對本文系統及關鍵技術所需要的質量信息進行分類和收集,使用E-R圖建模方法建立了生產過程質量信息管理系統數據模型,為系統開發和IETM技術的研究奠定數據基礎。3、參考IETM系統數據模塊編碼體系,結合企業生產過程與質量信息相關的產品零部件結構信息、生產信息和工藝信息,提出了生產過程質量信息管理系統的編碼方案。對具有通用性同時影響系統交互性和互操作性的零件清單編輯模塊和檢驗流程可視化模塊進行了研究,通過這兩個模塊能規范檢驗流程,實現檢驗狀態的實時可視化顯示。對IETM技術中的圖形與多媒體技術進行了研究,對適用于生產過程質量信息管理系統的虛擬仿真及可視化技術進行了方法及實例研究,證明了虛擬仿真及可視化技術的可行性。4、對生產過程質量信息管理系統開發與運行的軟硬件環境進行了系統介紹,以表格的形式描述了系統的主要數據庫內容,對系統部分功能模塊進行了介紹,驗證了 IETM技術在質量信息管理方面的可行性。
[Abstract]:The problem of product quality management is becoming more and more serious, the backward quality information collection method, the traditional quality control idea, the inefficient inspection response and the dispatch mode can not meet the new product production quality management demand. However, IETM technology has inherent advantages in quality information management, such as standard management, good interaction, etc. Therefore, it is of great significance to study the quality information management technology of production process by using IETM technology. This paper takes the inspection process of the main parts of a certain enterprise product as the research object, carries on the system development from the point of view of the product inspection process concerned by the enterprise and the user, and solves the original quality information collection in the production process by using the IETM related technology. The detailed research contents are as follows: 1. Make clear the main contents of quality information management, comb the internal information flow of the system according to the software development process, and analyze the user's demand. The quality information management system is established, and each function module of the system is planned and introduced. 2. The quality information needed by the system and the key technology is classified and collected. The data model of production process quality information management system is established by using E-R graph modeling method, which lays a data foundation for the system development and the research of IETM technology. 3. Referring to the coding system of data module of IETM system, The coding scheme of the production process quality information management system is put forward based on the product component structure information, production information and process information related to the production process and the quality information of the enterprise. This paper studies the parts list editing module and the inspection flow visualization module, which can affect the interaction and interoperability of the system simultaneously. Through these two modules, the inspection flow can be standardized and the real-time visual display of the inspection state can be realized. The graphics and multimedia technology in IETM technology is studied. The methods and examples of virtual simulation and visualization technology suitable for the quality information management system of production process are studied. The feasibility of virtual simulation and visualization technology is proved. 4. The software and hardware environment for the development and operation of the production process quality information management system is systematically introduced, and the main database contents of the system are described in the form of tables. Some functional modules of the system are introduced, and the feasibility of IETM technology in quality information management is verified.
【學位授予單位】：哈爾濱工程大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP315;F273.2

【參考文獻】

相關期刊論文 前5條

1 史猛;劉國慶;;數字化軍檢系統分析與設計[J];信息通信;2015年09期

2 吳湘;劉艷妮;梁琰;;IETM在艦船綜合保障中的應用研究[J];艦船電子工程;2011年02期

3 張寧英;借助IT技術打造質量管理[J];中國質量;2002年08期

4 王燦,張根保,黃忠全,周正;基于質量BOM和整合條碼的質量信息系統的開發和實施[J];工業工程與管理;2001年05期

5 段桂江,唐曉青,汪叔淳;面向現代制造企業的集成質量系統模型[J];中國機械工程;1999年03期

相關博士學位論文 前1條

1 朱正萱;QFD在質量信息傳遞中的運用研究[D];南京理工大學;2002年

相關碩士學位論文 前8條

1 張小瑞;基于物聯網的復雜產品制造過程技術狀態管理關鍵技術研究[D];南京航空航天大學;2014年

2 丁嬌;面向航空設備維修測試的IETM系統研究與實現[D];南京航空航天大學;2012年

3 劉偉;基于MES的質量信息管理與質量追溯系統研究[D];山東大學;2012年

4 馮廷廷;基于MBD的飛機裝配工藝規劃與仿真[D];南京航空航天大學;2011年

5 張利俊;中國海軍裝備維修技術保障信息化建設研究[D];北京交通大學;2008年

6 崔鵬亮;基于QFD的質量信息管理系統研究[D];南京理工大學;2008年

7 張?jiān)吕?航空維修IETM關鍵技術研究和應用框架設計[D];南京航空航天大學;2007年

8 代紅梅;基于ISO9000的通用質量信息管理系統研究與應用[D];重慶大學;2004年

，

本文編號：2328247