【摘要】：超高強度鋼一般指強度高于1400MPa并兼有適當韌性的結構鋼。在航空工業中主要用于制造受力構件。隨著飛機性能的不斷改進,對其使用的結構材料提出了越來越高的要求,只有綜合性能優良的材料才能滿足所設計的要求。飛機起落架是飛機最重要的承力部件之一,其關鍵性承力構件主要選用超高強度鋼進行制造,超高強度鋼的高強度和高韌性使得它的加工相對于其他一般材料來說,加工較為困難,本論文選題針對一種新型的起落架超高強度耐蝕鋼結構件銑削參數及刀具進行了研究。本文主要研究了超高強度耐蝕鋼的切削力及切削溫度,并研究了銑削過程中涂層硬質合金刀具的磨損情況,最終結合上述研究的結果針對部分零件的典型結構,優化了典型部位的切削參數,有效提高了加工效率。
[Abstract]:Ultra-high strength steel generally refers to structural steel with strength higher than 1400MPa and proper toughness. It is mainly used to manufacture stress components in aviation industry. With the continuous improvement of aircraft performance, the structural materials used in aircraft have been put forward higher and higher requirements, only the materials with excellent comprehensive performance can meet the requirements of the design. Aircraft landing gear is one of the most important bearing components of aircraft. Its key bearing components are mainly made of ultra-high strength steel. The high strength and high toughness of ultra-high strength steel make it difficult to process compared with other general materials. In this paper, the milling parameters and cutting tools of a new type of ultra-high strength corrosion-resistant steel structure of landing gear are studied. In this paper, the cutting force and cutting temperature of ultra-high strength corrosion-resistant steel are studied, and the wear of coated cemented carbide tools during milling is studied. finally, according to the typical structure of some parts, the cutting parameters of typical parts are optimized and the machining efficiency is effectively improved.
【學位授予單位】：西安工業大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TG54

【參考文獻】

相關期刊論文 前5條

1 ;AerMet100——極好綜合性能的超高強度鋼[J];北京航空航天大學學報;1996年06期

2 張慧萍;王崇勛;杜煦;;飛機起落架用300M超高強鋼發展及研究現狀[J];哈爾濱理工大學學報;2011年06期

3 閆雪;陶華;高曉兵;張培培;李海濱;;300M超高強度鋼高速銑削切削力建模研究[J];機械強度;2008年05期

4 龍震海;王西彬;王好臣;;難加工材料高速切削過程中切削力的非線性特征規律析因研究[J];機械工程學報;2006年01期

5 齊德新,趙樹國,馬光鋒;切削BT20鈦合金材料中刀具磨損研究[J];機械制造;2003年07期

，

本文編號：2507256