【摘要】：熱軋過程引入的帶鋼表面等間距縱向條紋缺陷,經后工序酸洗、冷軋、連續退火等處理均無法徹底消除,嚴重影響成品表面質量。通過全流程缺陷演變研究及工藝試驗,確認了該缺陷是由熱軋精軋末機架工作輥輥面磨削螺旋紋在軋制過程中轉印至帶鋼表面所致。磨削過程中砂輪平面與軋輥輥面曲線的接觸匹配不當、磨輥工藝參數不合適等因素會導致磨削螺旋紋的產生。通過優化精軋工作輥CVC輥形及軋輥磨削參數,徹底消除了軋輥表面磨削螺旋紋以及由此導致的熱軋薄板表面等間距縱向條紋缺陷。
[Abstract]:The defects of strip surface equal spacing longitudinal stripe introduced in hot rolling process can not be completely eliminated by acid pickling, cold rolling and continuous annealing, which seriously affect the surface quality of finished products. Through the research on the evolution of the defect in the whole process and the process test, it is confirmed that the defect is caused by the grinding of the helical grain of the work roll surface of the finishing stand of the hot rolling mill to the surface of the strip steel during the rolling process. In the grinding process, the contact between the grinding wheel plane and the roller surface curve is not matched properly, and the technological parameters of the grinding roller are not suitable, which will lead to the production of the grinding spiral grain. By optimizing the CVC roll shape and the grinding parameters of the finished work roll, the defects of the spiral grain grinding on the surface of the roll and the equal spacing longitudinal stripe on the surface of the hot rolled sheet are completely eliminated.
【作者單位】： 首鋼集團總公司技術研究院薄板研究所;首鋼股份公司遷安鋼鐵公司技術質量部;
【分類號】：TG335.5

【參考文獻】

相關期刊論文 前9條

1 于洋;唐帥;郭曉波;關菊;王國棟;劉s，

本文編號：2352993