【摘要】：利用X射線衍射(XRD)、熱膨脹儀、電子背散射衍射(EBSD)研究了兩相區回火溫度對一種Mn-Mo系微合金鋼亞穩奧氏體形成及力學性能的影響。結果表明:當兩相區回火溫度低于650℃時,實驗鋼的亞穩奧氏體具有較好的穩定性,其室溫下的體積分?jǐn)?shù)隨著兩相區回火溫度的升高逐漸增大;當兩相區回火溫度高于650℃時,亞穩奧氏體的穩定性顯著降低,在回火冷卻過程中,部分奧氏體轉變?yōu)?新鮮"馬氏體,室溫亞穩奧氏體體積分?jǐn)?shù)隨兩相區回火溫度升高而逐漸降低。當兩相區回火溫度為650℃時,鋼中亞穩奧氏體具有最佳的體積分?jǐn)?shù)和穩定性配合。力學測試結果表明:當兩相區回火溫度為650℃時,實驗鋼的力學性能最佳,其屈服強度為748MPa,抗拉強度為813MPa,伸長率為27.5%,-20℃和-100℃的沖擊功分別為217J和117J。
[Abstract]:The effect of tempering temperature in two-phase region on the formation of metastable austenite and mechanical properties of a Mn-Mo system microalloyed steel was studied by means of X-ray diffraction (XRD), thermal expansion instrument and electron backscatter diffraction (EBSD). The results show that the metastable austenite of the experimental steel has good stability when the tempering temperature of the two-phase zone is lower than 650 鈩，

本文編號：2293192