【摘要】：研究了在應變速率0.001 s-1條件下,TLM鈦合金在室溫壓縮和850℃熱壓縮的形變機理和組織演變規律。實驗結果表明:TLM鈦合金在冷壓縮和熱壓縮條件下具有不同的形變機理和組織演變規律。在冷壓縮過程中,TLM鈦合金的形變特征主要是孿生、應力誘發馬氏體轉變及位錯滑移;在850℃熱壓縮過程中,TLM鈦合金的形變機理主要是位錯滑移、動態回復和動態再結晶。在熱壓縮過程中,流變應力的軟化過程與壓縮過程中的動態回復和動態再結晶有關。TLM鈦合金在冷壓縮和熱壓縮條件下的抗壓縮強度分別為975和40 MPa;相比冷壓縮強度,TLM合金在850℃條件下的熱抗壓縮強度降低了96%。
[Abstract]:The deformation mechanism and microstructure evolution of TLM titanium alloy under room temperature compression and hot compression at 850C were studied at strain rate of 0.001 s ~ (-1). The experimental results show that TLM titanium alloy has different deformation mechanism and microstructure evolution law under cold compression and hot compression. During cold compression, the deformation characteristics of TLM titanium alloy are mainly twinning, stress induced martensite transformation and dislocation slip, and the deformation mechanism of TLM titanium alloy is mainly dislocation slip, dynamic recovery and dynamic recrystallization during hot compression at 850 鈩，

本文編號：2271771