【摘要】：采用金相顯微鏡、掃描電鏡、X射線能譜儀和力學性能測試等手段,研究了Zr含量對BT25合金等溫鍛件組織及力學性能的影響。結果表明:采用兩相區等溫鍛造工藝及提高Zr含量可促使BT25合金組織金屬流線的形成,抑制了鍛后合金冷卻時晶界α相的形核及長大,可得到典型的雙態組織;隨Zr含量增加(由1.65%增加到3.86%),BT25合金在室溫,500、550℃高溫的拉伸強度和熱穩定強度分別提高了161、123、96、57 MPa;斷裂韌性由68.9 MPa·m~(1/2)提高至85.5 MPa·m~(1/2)。
[Abstract]:The effect of Zr content on the microstructure and mechanical properties of BT25 alloy isothermal forgings was studied by means of metallographic microscope, scanning electron microscope and X-ray energy spectrometer. The results show that two-phase isothermal forging technology and increasing Zr content can promote the formation of metal streamline in BT25 alloy, inhibit the nucleation and growth of grain boundary 偽 phase during cooling of the forged alloy, and obtain typical double structure. With the increase of Zr content (from 1.65% to 3.86%), the tensile strength and thermal stability strength of TBT-25 alloy at room temperature and 550 鈩，

本文編號：2128197