本文關鍵詞：隧道掘進機刀群與盤體支撐筋耦合布置設計　出處：《機械工程學報》2014年21期 　論文類型：期刊論文

  更多相關文章： 全斷面隧道掘進機 刀具布置 刀盤盤體結構 耦合 協同進化

【摘要】：刀盤是全斷面隧道掘進機(Tunnel boring machine,TBM)的關鍵部件,TBM刀盤系統設計直接關系掘進效率和可靠性。刀盤系統設計的關鍵是復雜巖石邊界下刀群布置設計與刀盤盤體結構設計,二者相互耦合,相互影響。分析刀群與盤體支撐結構之間空間位置耦合以及支撐結構與刀盤強度剛度之間的非線性耦合關系,建立刀群與盤體支撐結構耦合布置優化模型,提出多子系統協同進化的刀具適應性布置與盤體結構耦合設計方法。以引洮工程為例進行驗證,結果表明:支撐筋初始安裝角與刀盤強度、剛度之間存在非線性函數關系,多子系統協同進化方法求解出的刀群與支撐筋耦合布置方案的最大等效應力、最大變形量、不平衡力矩、不平衡力、順次角度等指標相比原方案降低了30%以上,以此證明提出的耦合優化模型及其求解方法的可行性和有效性,可為T(mén)BM刀盤系統設計提供一定的借鑒與方法支撐。
[Abstract]:Cutter head is the key component of Tunnel boring Machine (TBM). The design of TBM cutter head system is directly related to the tunneling efficiency and reliability. The key to the design of cutter head system is the design of cutter group arrangement under complex rock boundary and the structure design of cutter head body, which are coupled with each other. This paper analyzes the spatial coupling between cutter group and disk support structure, and the nonlinear coupling relationship between the support structure and the strength and stiffness of the cutter head, and establishes the optimization model of the coupling arrangement between the tool group and the disk support structure. The coupling design method of tool adaptive arrangement and disc structure for multi-subsystem co-evolution is proposed. The results show that the initial mounting angle and the strength of cutter head are obtained by the example of Tao diversion Project. There is a nonlinear function relationship between stiffness. The maximum equivalent stress, maximum deformation, unbalanced moment and unbalanced force are obtained by multi-subsystem co-evolution method. Compared with the original scheme, the sequential angle index is reduced by more than 30%, which proves the feasibility and effectiveness of the proposed coupling optimization model and its solution method. It can provide some reference and method support for the design of TBM cutter head system.
【作者單位】： 大連理工大學機械工程學院;
【基金】：國家重點基礎研究發展計劃(973計劃,2013CB035400) 國家自然科學基金(51375001) 遼寧省科技攻關(2011220031) 高等學校博士學科點專項科研基金(20110041110029)資助項目
【分類號】：U455.31
【正文快照】： 0前言1全斷面隧道掘進機(Tunnel boring machine,TBM)是一種用于隧道掘進的高端工程裝備�！秶�(guó)家中長期科學和技術發展規劃綱要(2006~2020)》強調*國家重點基礎研究發展計劃(973計劃,2013CB035400)、國家自然科學基金(51375001)、遼寧省科技攻關(2011220031)和高等學校博士學

【參考文獻】

相關期刊論文 前8條

1 張照煌,葉定海,趙慶玉;巖石掘進機刀具間距的確定及分析[J];工程機械;2002年11期

2 張照煌;喬永立;;全斷面巖石掘進機盤形滾刀布置規律研究[J];工程力學;2011年05期

3 霍軍周;孫偉;郭莉;李震;張旭;;多滾刀順次作用下巖石破碎模擬及刀間距分析[J];哈爾濱工程大學學報;2012年01期

4 紀昌明;張照煌;;全斷面巖石掘進機刀盤上刀具布置規律研究[J];建設機械技術與管理;2008年04期

5 蒲毅;劉建琴;郭偉;裴瑞英;;土壓平衡盾構機刀盤刀具布置方法研究[J];機械工程學報;2011年15期

6 王家，

本文編號：1434593