【摘要】：采取重量法系統地研究母液種類、試驗樣品量、烘干時間、烘干溫度、復配材料等因素對聚羧酸減水劑(PCE)含固量測試測試值的影響。結果表明:按照現行國家標準GB/T 8077—2012《混凝土外加劑勻質性試驗方法》規定的重量法測試聚羧酸減水劑含固量時,因操作方法不統一,常常出現實測值與理論值存在較大偏差的情況。當取樣量在4 g左右、烘干時間為4~6 h、烘干溫度為105℃時,聚羧酸母液及成品含固量的測試結果與理論值較為吻合。
[Abstract]:The effects of mother liquor type, sample quantity, drying time, drying temperature and compound materials on the solid content of polycarboxylic acid reducer (PCE) were studied systematically by gravimetric method. The results show that when the solid content of polycarboxylic acid water reducer is measured by gravimetric method according to the present national standard GB/T 8077-2012 "testing method for homogeneity of concrete admixture", the operation method is not uniform. There is often a large deviation between the measured value and the theoretical value. When the sampling amount is about 4 g, the drying time is 4 鈩，

本文編號：2240221