本文選題：絲光沸石 + 硼氫化鈉��； 參考：《化工新型材料》2017年02期

【摘要】：基于化學浸漬與原位化學還原相結合的方法制備了一系列CoB/棒狀絲光沸石負載型非晶態合金催化劑,并系統考察了該催化劑在硼氫化鈉水解制氫中的催化活性。通過X射線衍射和掃描電鏡對其晶相結構和表面形貌進行了表征。硼氫化鈉水解制氫實驗表明,CoB活性組分負載量為5%的CoB/絲光沸石催化劑催化效果相對最好,過高的負載量不利于催化劑活性的提高。通過絲光沸石負載可顯著提高CoB合金催化劑的催化活性,反應動力學計算顯示基于該催化劑的硼氫化鈉水解制氫反應為零級反應,其表觀反應活化能Ea為53.18kJ/mol,遠低于純CoB的活化能(73.37kJ/mol)。
[Abstract]:A series of amorphous alloy catalysts supported on CoB/ rod-like mordenite were prepared based on the combination of chemical impregnation and in situ chemical reduction. The catalytic activity of the catalyst in hydrolysis of sodium borohydride to produce hydrogen was systematically investigated. The crystal structure and surface morphology were characterized by X-ray diffraction and scanning electron microscope. The experiments of hydrolysis of sodium borohydride to produce hydrogen show that the catalyst supported on 5% active component of CoB/ mordenite has the best catalytic effect, and too much loading is not conducive to the improvement of catalyst activity. The catalytic activity of CoB alloy catalyst can be significantly improved by supporting mordenite. The kinetic calculation of the reaction shows that the hydrolysis of sodium borohydride to produce hydrogen based on the catalyst is a zero order reaction. The apparent activation energy (EA) is 53.18kJ / mol, which is much lower than that of pure CoB (73.37kJ / mol / mol).
【作者單位】： 遼寧石油化工大學化學化工與環境石油化工重點實驗室;
【基金】：國家自然科學基金項目(21201096) 遼寧省教育廳資助項目(L2010242) 遼寧省石油化工重點實驗室項目(LZ2015050)
【分類號】：O643.36;TQ116.2

【相似文獻】

相關期刊論文 前10條

1 ;絲光沸石的合成及其性質研究報告[J];上海化工;1974年02期

2 ;絲光沸石的合成及其性質[J];化肥工業;1974年01期

3 ;用絲光沸石回收硝酸廠尾氣的研究[J];化肥工業;1974年01期

4 ;絲光沸石合成方法的改進[J];遼寧化工;1975年06期

5 ;絲光沸石的合成[J];石油化工;1978年04期

6 徐文e，

本文編號：1838147