本文關鍵詞： 地質聚合物 粉煤灰 玻璃微粉 抗壓強度 工藝參數　出處：《硅酸鹽通報》2016年08期 　論文類型：期刊論文

【摘要】：利用粉煤灰和廢玻璃微粉為主要原料,通過氫氧化鈉和水玻璃的混合激發,制備地質聚合物。討論了水玻璃摻量和模數、液固比和養護溫等因素對地質聚合物抗壓強度的影響。研究表明:礦物聚合物抗壓強度均隨著水玻璃摻量及模數、液固比、養護溫度的增大而先增大后減小。得出了優化的工藝條件為:水玻璃摻量10%、水玻璃模數1.4、固液比0.45,養護溫度40~60℃,抗壓強度可達36 MPa以上。
[Abstract]:Using fly ash and waste glass powder as main raw materials, geopolymers were prepared by mixed excitation of sodium hydroxide and sodium silicate. The effects of liquid / solid ratio and curing temperature on the compressive strength of geopolymers are studied. With the increase of curing temperature and the increase of curing temperature, the optimum technological conditions are as follows: water glass content is 10%, water glass modulus is 1.4, solid-liquid ratio is 0.45, curing temperature is 4060 鈩，

本文編號：1524005