二氧化鈰（CeO₂）因其具有較強的儲放氧能力,被用作氧化還原反應的催化材料.自2005年,研究者制備出形貌可控的CeO₂納米棒、納米立方塊和納米多面體,在CeO₂形貌控制及構效關系研究方面取得長足發展.各種結構表征手段包括原位拉曼（in situ Raman）、原位傅里葉變換紅外光譜（in situ DRIFTS）、核磁共振（NMR）和電鏡等被用來研究不同形貌CeO₂的表面結構和在催化反應中的活性差異.一般的活性規律為CeO₂納米棒（{110}/{100}）>納米立方塊（{100}）>納米多面體（{111}/{100}）.近年來,負載型CeO₂催化劑因其能穩定分散金屬,通過金屬-載體相互作用調控界面電子結構并表現出優異的催化活性而引起廣泛關注,其中晶面效應在負載型CeO₂催化體系中顯得較為復雜.銅鈰催化劑被認為是非常經濟有效的CO氧化催化劑,然而由于制備和測試條件差異導致的CeO₂晶面對銅鈰催化劑催化... 

【文章來源】：Chinese Journal of Catalysis. 2020,41(06)北大核心EISCICSCD

【文章頁數】：14 頁

【文章目錄】：
1. Introduction
2. Experimental
    2.1. Synthesis of catalysts
        2.1.1. Preparation of CeO2 NC
        2.1.2. Preparation of CeO2 NR
        2.1.3. Preparation of Cu–CeO2 catalysts
    2.2. Characterization of as-prepared catalysts
    2.3. Catalytic performance tests
3. Results and discussions
    3.1. Morphological characterization of as-prepared catalysts
    3.2. Catalytic performance of as-prepared samples
    3.3. Textural properties of as-prepared catalysts
    3.4. XPS surface analysis
    3.5. Reducibility of as-prepared catalysts
    3.6. CO-TPD analysis of CO adsorption properties of as-prepared catalysts
    3.7. In situ DRIFTS analysis of as-prepared catalysts
    3.8. Discussion
4. Conclusions
Graphical Abstract
Insights into facet-dependent reactivity of CuO–CeO2 nanocubes and nanorods as catalysts for CO oxidation reaction



本文編號：3535646