瀝青路面就地?zé)嵩偕鷱?fù)拌機測控系統設計
發布時間：2018-03-12 23:12
本文選題：就地?zé)嵩偕?/strong> 切入點：IEC61131-3 出處：《南京理工大學》2015年碩士論文 論文類型：學位論文
【摘要】：隨著高速公路建設的迅速發展,就地?zé)嵩偕夹g(shù)在我國高速公路養護中有著顯著的經濟效益和社會效益。本文主要對就地?zé)嵩偕劁仚C組中的復拌機進行了研究并對復拌機測控系統進行設計。通過對復拌機的研究,把復拌機測控系統分為加熱系統,行走系統,工作系統和輔助系統4個子系統,根據每個子系統的功能,分析其液壓驅動原理,選擇合適的液壓控制元件,設計液壓控制系統；提出以IEC61131-3編程標準開發的TTC200控制器和ST104V5T高性能顯示模塊為核心的復拌機測控系統硬件總體方案設計,采用模塊化思想對復拌機工作流程進行軟件設計,并在CAN總線報文設計的基礎上實現了監控數據的交換。為了驗證加熱復拌機測控系統的可靠性,對該系統進行了部分功能的現場調試,并根據調試現象及數據對測控系統做了相應的驗證,調試結果證明本測控系統基本達到了設計目的,滿足加熱復拌機智能化的需求。
[Abstract]:With the rapid development of highway construction, The geothermal regeneration technology has remarkable economic and social benefits in the maintenance of expressway in China. This paper mainly studies the remixing machine in the geothermal regeneration and repaving unit and designs the measuring and controlling system of the remixing machine. Through the research of the remixing machine, The measurement and control system of remixing machine is divided into four subsystems: heating system, walking system, working system and auxiliary system. According to the function of each subsystem, the hydraulic driving principle is analyzed, the suitable hydraulic control element is selected, and the hydraulic control system is designed. This paper presents the hardware design of the control system of the remixing machine, which is based on the TTC200 controller and the high performance display module of ST104V5T, which is developed by the IEC61131-3 programming standard. The software design of the work flow of the remix machine is carried out by using the modularization idea. In order to verify the reliability of the measurement and control system of the heating remix machine, the system is debugged in the field based on the design of the CAN bus message. The test and control system is verified according to the debugging phenomenon and data. The debugging results show that the system basically achieves the purpose of design and meets the demand of intelligent heating remixing machine.
【學位授予單位】：南京理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：U418.3
【參考文獻】
相關期刊論文 前1條
1 彭瑜;;工控編程語言IEC 61131-3和PLCoPen組織[J];電氣時代;2006年05期
相關碩士學位論文 前6條
1 范春嬌;瀝青路面就地冷再生技術研究[D];長安大學;2008年
2 張振英;基于CAN總線的混合動力公交客車控制系統設計[D];大連交通大學;2008年
3 邢濤;基于IEC的起重機仿真控制系統研究[D];西南交通大學;2011年
4 張雄;瀝青路面廠拌熱再生及其設備改進技術研究[D];長安大學;2012年
5 魏丹;全液壓驅動履帶式拖拉機電控系統的設計[D];西北農林科技大學;2013年
6 紀常溪;全液壓裝載機動力驅動系統設計及控制研究[D];哈爾濱工程大學;2013年
，本文編號：1603737
本文鏈接：http://sikaile.net/kejilunwen/daoluqiaoliang/1603737.html
教材專著
