本文選題：FMEA方法 + 技改項目�。� 參考：《燕山大學》2014年碩士論文

【摘要】：隨著我國創新型企業的不斷發展，越來越多的企業都嘗試進行技術改造。為了確保技術改項目能夠省時高效得完成，，一些企業引入FMEA事先預防的思想，嘗試把FMEA方法應用到技改項目中，以求技改項目順利實施。 論文通過對FMEA方法在企業技改項目中應用效果進行評價，構建FMEA方法應用的評價模型。這樣不僅有利于改善企業技改項目中FMEA的應用狀況，同時還能提高技改項目的效率，以至于更好地促進企業戰略目標的實現。 首先，針對技術改造項目和FMEA理論的國內外研究現狀，分析論文的研究背景和研究意義。通過介紹技術改造項目、失效模式與后果分析以及項目評價方法的相關理論，為研究FMEA在企業技改項目中的應用效果評價奠定理論基礎。 其次，對FMEA在企業技改項目中的應用狀況進行分析。闡述FMEA與技改項目的適用性以及FMEA在企業技改項目前期準備階段、實施階段和收尾階段的各自應用機理。 再次，基于企業技改項目評價指標選取原則，分析并選取六個主要評價指標，構建FMEA在企業技改項目中應用效果評價指標體系。介紹各指標以及所屬二級指標權重的確定方法，確定模糊綜合評價法對技改項目進行綜合評價，并選擇合適的處理方法對評價結果進行分析。 最后，選取北京巴威公司熱處理爐技改項目進行實證分析。通過對指標體系的判斷矩陣進行調查匯總，進行指標權重計算。建立指標隸屬度矩陣，完成二級模糊綜合評價和一級模糊綜合評價，最后分析評價結果并提出反饋建議。
[Abstract]:With the continuous development of innovative enterprises in China, more and more enterprises are trying to carry out technological transformation. In order to ensure that the technical reform project can be completed efficiently and efficiently, some enterprises introduce the idea of FMEA prevention in advance and try to apply the FMEA method to the technical reform project in order to carry out the technical reform project smoothly. By evaluating the application effect of FMEA method in enterprise technical innovation project, the evaluation model of FMEA method is constructed. This will not only improve the application of FMEA in the enterprise technical innovation project, but also improve the efficiency of the technical reform project, so as to better promote the realization of the strategic goal of the enterprise. Firstly, the research background and significance of the thesis are analyzed according to the status quo of the technical transformation project and the FMEA theory at home and abroad. Through the introduction of the technical transformation project, failure mode and consequence analysis, and the relevant theory of the project evaluation method, this paper lays a theoretical foundation for the study of the application effect evaluation of FMEA in the enterprise technical innovation project. Secondly, the application of FMEA in enterprise technical innovation project is analyzed. The applicability of FMEA and technical innovation project and the application mechanism of FMEA in the preparatory stage, implementation stage and closing stage of enterprise technical reform project are expounded. Thirdly, based on the selection principle of enterprise technical innovation project evaluation index, this paper analyzes and selects six main evaluation indexes, and constructs the evaluation index system of FMEA applied in enterprise technical innovation project. This paper introduces the method of determining the weight of each index and its secondary index, determines the fuzzy comprehensive evaluation method to evaluate the technical innovation project, and selects the appropriate treatment method to analyze the evaluation result. At last, the paper chooses the heat treatment furnace technical innovation project of Beijing Barwick Company to carry on the demonstration analysis. The index weight is calculated by investigating and summarizing the judgment matrix of the index system. The index membership matrix is established to complete the two-level fuzzy comprehensive evaluation and the first-class fuzzy comprehensive evaluation. Finally, the evaluation results are analyzed and some feedback suggestions are put forward.
【學位授予單位】：燕山大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F426.4;F273.1;F224

【參考文獻】

相關期刊論文 前10條

1 崔文彬;吳桂濤;孫培廷;張余慶;;故障模式影響分析方法的整體性與經濟性改進[J];大連海事大學學報;2006年04期

2 徐曉友;“有無法”在技術改造項目經濟評價中的應用[J];電力建設;2003年09期

3 吉啟蘇;;FM EA在風險定性分析中的應用[J];經營管理者;2014年03期

4 毛占元;;大型鋼鐵聯合企業的技術改造[J];鋼鐵研究;1989年04期

5 余憲耀,邱國娟;技改工程應用現代項目管理理論[J];化肥設計;2005年02期

6 宋琴;;試述企業技術改造的經濟分析[J];經濟視角(中旬);2011年02期

7 張建國,黃文敏;大型機械產品FMEA和FTA綜合分析方法[J];機械設計與制造;2000年01期

8 楊飛,李明,曾翰通;關于FMEA與PDM集成框架的研究[J];制造業自動化;2002年08期

9 甄巖,鄭海龍,陸再平;失效模式及后果分析(FMEA)在企業質量管理中的應用[J];技術經濟與管理研究;2000年03期

10 張妍蕊;技術改造及其經濟評價[J];技術經濟與管理研究;2004年05期

本文編號：2104931