【摘要】：通過試驗研究了不同配合比下水泥-石灰-粉煤灰體系加氣混凝土板材的發氣穩定性、稠化速度、密度及強度等各項性能。結果表明,影響其基本性能的因素主要有原材料的鈣硅比、發氣劑的添加量、粉煤灰的基本性能、澆注溫度及影響其強度和韌性的添加劑等。最終確定穩泡劑摻量為0.02%時的最佳配比為:m(水泥)∶m(石灰)∶m(粉煤灰)∶m(石膏)∶m(鋁粉膏)∶m(廢漿)=13.6∶14.0∶62.6∶2.9∶0.1∶5.6;最佳養護制度為:60℃靜停2~4 h后,180℃蒸壓養護8 h,此時制備的加氣混凝土板材氣孔結構最均勻,試塊勻質性最好,密度為511 kg/m~3時的抗壓強度可以達到4.7 MPa。
[Abstract]:In this paper, the gassing stability, thickening speed, density and strength of cement lime fly ash aerated concrete plate with different mix ratio are studied. The results show that the main factors affecting its basic properties are the ratio of calcium to silicon of raw materials, the amount of aerating agent, the basic properties of fly ash, the pouring temperature and the additives affecting its strength and toughness. Finally, the optimum ratio of: m (cement,): m (lime,): m (fly ash,): m (gypsum,): m (aluminum paste): m (waste slurry was determined when the content of foam stabilizer was 0.02) = 13. 6: 14. 0: 62.6 : 2. 9: 0. 1: 5. 6; The best curing system is as follows: after stopping at 60 鈩，

本文編號：2417873