發布時間：2018-04-21 22:38

  本文選題：服務業FDI + 技術溢出　； 參考：《南京航空航天大學》2014年碩士論文

【摘要】：經濟的發展同時受到國內外資源投入的影響。作為中國FDI流入規模最大的地區之一，江蘇省近幾年開始注重服務業的發展。在這樣的情況下，如何充分利用FDI促進江蘇服務業、甚至整個地區經濟的高效發展，將是一個重要的課題。 本文從FDI技術溢出效應的角度，利用時間序列和面板數據回歸，檢驗江蘇服務業FDI行業內與行業間技術溢出效應的存在性；并根據存在性檢驗的結果，整理并檢驗江蘇服務業FDI技術溢出的影響因素。 實證分析結果表明：（1）在服務業內，江蘇服務業FDI不存在顯著的技術溢出效應，不管是行業內還是行業間；（2）在服務業與制造業間，江蘇服務業FDI存在技術溢出效應，，并且是通過顯著的前后向關聯效應對制造業產生技術溢出效應；（3）江蘇服務業FDI技術溢出的促進因素包括郵電通信水平、制造業技術水平和服務業外資獨資化程度，制約因素則包括制造業內資企業與港澳臺資企業的技術差距和服務業開放度。 論文的最后基于實證分析結果，提出了促進江蘇服務業FDI技術溢出的相關對策建議，為更好地提高江蘇外資利用質量提供參考。
[Abstract]:At the same time, economic development is influenced by domestic and foreign resources input. As one of the largest inflow regions of FDI in China, Jiangsu Province began to pay attention to the development of service industry in recent years. Under such circumstances, how to make full use of FDI to promote the efficient development of Jiangsu service industry and even the whole regional economy will be an important subject. From the point of view of FDI technology spillover effect, this paper uses time series and panel data regression to test the existence of technology spillover effect in and between FDI industries in Jiangsu service industry, and according to the result of existence test, Collate and test the influencing factors of FDI technology spillover in Jiangsu service industry. The result of empirical analysis shows that there is no significant technology spillover effect in service industry FDI in Jiangsu service industry, no matter in industry or industry) there is technology spillover effect between service industry and manufacturing industry in Jiangsu service industry FDI, and there exists technology spillover effect between service industry and manufacturing industry in Jiangsu service industry. And it is the technology spillover effect to the manufacturing industry through the significant backward and backward correlation effect. (3) the promotion factors of the FDI technology spillover in Jiangsu service industry include the level of post and telecommunications, the technology level of manufacturing industry and the degree of wholly foreign-owned foreign investment in the service industry. The constraints include the technological gap between domestic manufacturing enterprises and Hong Kong, Macao and Taiwan enterprises and the openness of the service industry. Finally, based on the results of empirical analysis, this paper puts forward some countermeasures and suggestions to promote the FDI technology spillover in Jiangsu service industry, which provides a reference for improving the quality of foreign capital utilization in Jiangsu Province.
【學位授予單位】：南京航空航天大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F719;F832.6

【參考文獻】

相關期刊論文 前7條

1 劉艷;;服務業FDI技術溢出效應的影響因素分析——基于中國16省市面板數據的實證研究[J];上海交通大學學報(哲學社會科學版);2012年03期

2 王欣;陳麗珍;;外商直接投資、前后向關聯與技術溢出——基于江蘇制造業面板數據的經驗研究[J];數量經濟技術經濟研究;2008年11期

3 亓朋;許和連;李海崢;;技術差距與外商直接投資的技術溢出效應[J];數量經濟技術經濟研究;2009年09期

4 李賓;;我國資本存量估算的比較分析[J];數量經濟技術經濟研究;2011年12期

5 趙滌非;郭鴻瓊;陳宴真;;我國FDI技術溢出與人力資本互動機制的實證研究[J];亞太經濟;2012年02期

6 張二君;;SFDI對河南省傳統服務業技術進步的影響研究[J];預測;2011年05期

7 李燕;韓伯棠;張慶普;;FDI溢出、門檻效應與我國區域技術進步——基于全國29個省市面板數據的實證研究[J];中國科技論壇;2011年03期

本文編號：1784413