【摘要】：房地產行業和汽車行業的快速發展推動了國內外浮法玻璃的需求量。我國雖然擁有世界“三大浮法玻璃工藝”中的洛陽玻璃,但是仍有相當一部分的浮法玻璃生產線所采用的依舊是80年代的控制系統,不但控制精度不高、玻璃的產量和質量一般,而且能耗非常高。近幾年我國自動化行業發展迅速,浮法玻璃生產線也逐漸在向大型化、智能化發展,先進浮法玻璃熱端控制系統的研究意義重大。 本文首先分析了國內外浮法玻璃熱端控制系統的發展現狀,根據浮法玻璃熱端控制系統的控制要求,使用西門子SIMATIC PCS7控制系統作為設計平臺,對整個浮法玻璃熱端控制系統的硬件配置、系統架構的配置、軟硬件實現以及控制策略做了詳細的設計。其中在浮法玻璃流道玻璃液溫度控制方面提出了采用先進的內�？刂撇呗赃M(jìn)行改進,并在MATLAB的SIMULINK平臺上進行仿真,仿真結果驗證此方案相比原控制策略有明顯的優勢,在以后的工程實踐當中值得借鑒。
[Abstract]:The rapid development of real estate industry and automobile industry has promoted the demand of float glass at home and abroad. Although our country has the Luoyang glass in the "three big float glass technology" in the world, but there are still quite a few float glass production lines that still adopt the control system of the 1980s, not only the control precision is not high. The output and quality of glass is average, and the energy consumption is very high. In recent years, with the rapid development of automation industry in China, the production line of float glass is gradually developing to large and intelligent. It is of great significance to study the advanced hot end control system of float glass. This paper first analyzes the development of hot end control system of float glass at home and abroad. According to the control requirements of hot end control system of float glass, Siemens SIMATIC PCS7 control system is used as the design platform. The hardware configuration, system architecture configuration, hardware and software implementation and control strategy of the whole floating glass hot end control system are designed in detail. In the aspect of temperature control of glass liquid in float glass channel, advanced internal model control strategy is proposed and simulated on the SIMULINK platform of MATLAB. The simulation results show that this scheme has obvious advantages compared with the original control strategy. In the future engineering practice is worth learning.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TQ171.6;TP273

【參考文獻】

相關期刊論文 前8條

1 周天輝,陳雙七;浮法錫槽技術的進展[J];玻璃;2003年05期

2 宋威,周偉;集散控制系統應用現狀及其發展[J];工業控制計算機;2004年11期

3 周哲民;羅智勇;何濤;;基于自適應模糊Smith的浮法玻璃熔窯溫度控制[J];工業儀表與自動化裝置;2011年03期

4 陳坤;;PCS7系統在深南玻浮法一線改造項目中的應用[J];國外建材科技;2008年02期

5 田玉楚;大時滯工業過程的雙控制器結構[J];自動化學報;1999年06期

6 張士超;儀垂杰;郭健翔;林海波;劉尊民;周揚名;方玲;;集散控制系統的發展及應用現狀[J];微計算機信息;2007年01期

7 趙志誠;劉志遠;張井崗;;一種時滯過程內模PID控制器魯棒整定方法[J];信息與控制;2010年05期

8 孫建平;屈穎;施壯;;大純滯后系統的模糊-Smith控制及參數優化[J];儀器儀表學報;2006年04期

，

本文編號：2366566