動力離心試驗常規點位式量測技術改進方法
發布時間:2019-06-14 19:16
【摘要】:動力離心試驗的先進性和有效性已在國內外巖土地震工程界形成廣泛共識,但其優越性的充分發揮需要可靠量測技術作為基礎?偨Y(jié)了動力離心試驗點位式量測技術常發生的故障形式,探討了孔隙水壓、加速度和位移3種常規點位式傳感器設計和量測改進方法,用以提高試驗數據可靠性,采用分體式結構孔隙水壓力計增強了故障應急能力和試驗可控性,用真空去離子飽和法提高透水石飽和速率和質量,加速度計采用分體式結構,提高了試驗操作性和核心元件利用率,采用橡膠密封技術減小了動荷載中沉降和傾斜發生率。提出加速度計和位移計聯合測試與布設方法,可以獲取更為準確的土體內側向位移變化過程,具有較好靈活性。
[Abstract]:The advanced and effective dynamic centrifugal test has reached a wide consensus in the field of geotechnical seismic engineering at home and abroad, but the full play of its advantages needs reliable measurement technology as the basis. This paper summarizes the common fault forms of dynamic centrifugal test point position measurement technology, and probes into three conventional point position sensors design and measurement improvement methods of pore water pressure, acceleration and displacement, which are used to improve the reliability of test data. The fault emergency ability and test controllability are enhanced by using split structure pore water pressure gauge, and the saturation rate and quality of permeable stone are improved by vacuum deionization saturation method. The accelerometer adopts split structure, which improves the operation of the test and the utilization ratio of the core components, and the rubber sealing technology is used to reduce the incidence of settlement and tilt in the dynamic load. The joint test and arrangement method of accelerometer and displacement meter is put forward, which can obtain more accurate inner displacement change process of soil and has good flexibility.
【作者單位】: 中國地震局工程力學研究所地震工程與工程振動重點實驗室;加州大學戴維斯分校土工模擬中心;
【基金】:中央級公益性研究所基本科研業務費專項(No.2014B09) 國家自然科學基金(No.41272357)
【分類號】:TU41
[Abstract]:The advanced and effective dynamic centrifugal test has reached a wide consensus in the field of geotechnical seismic engineering at home and abroad, but the full play of its advantages needs reliable measurement technology as the basis. This paper summarizes the common fault forms of dynamic centrifugal test point position measurement technology, and probes into three conventional point position sensors design and measurement improvement methods of pore water pressure, acceleration and displacement, which are used to improve the reliability of test data. The fault emergency ability and test controllability are enhanced by using split structure pore water pressure gauge, and the saturation rate and quality of permeable stone are improved by vacuum deionization saturation method. The accelerometer adopts split structure, which improves the operation of the test and the utilization ratio of the core components, and the rubber sealing technology is used to reduce the incidence of settlement and tilt in the dynamic load. The joint test and arrangement method of accelerometer and displacement meter is put forward, which can obtain more accurate inner displacement change process of soil and has good flexibility.
【作者單位】: 中國地震局工程力學研究所地震工程與工程振動重點實驗室;加州大學戴維斯分校土工模擬中心;
【基金】:中央級公益性研究所基本科研業務費專項(No.2014B09) 國家自然科學基金(No.41272357)
【分類號】:TU41
【參考文獻】
相關期刊論文 前10條
1 劉祥慶;劉晶波;王宗綱;;土-結構動力離心模型試驗傳感器位置的優選[J];清華大學學報(自然科學版)網絡.預覽;2008年06期
2 王永志;袁曉銘;孫銳;;大型振動離心機設備設計關鍵技術研究[J];世界地震工程;2011年02期
3 袁曉銘;曹振中;孫銳;陳龍偉;孟上九;董林;王維銘;孟凡超;陳紅娟;張建毅;蔡曉光;;汶川8.0級地震液化特征初步研究[J];巖石力學與工程學報;2009年06期
4 包承綱;我國離心模擬試驗技術的現狀和展望[J];巖土工程學報;1991年06期
5 張嘎;牟太平;張建民;;基于圖像分析的土坡離心模型試驗變形場測量[J];巖土工程學報;2007年01期
6 楊俊杰;劉強;柳飛;孞oた的,
本文編號:2499618
本文鏈接:http://sikaile.net/guanlilunwen/chengjian/2499618.html
最近更新
教材專著