燒結行業衛生防護距離標準研究
發布時間:2018-12-11 12:19
【摘要】:目的 對比分析燒結行業衛生防護距離與大氣環境防護距離的差異,,為制定合理衛生防護距離標準提供依據。 方法 通過現場調研,對燒結企業的特征污染物進行無組織排放源源強的監測,分別采用“地面濃度反推法”和“點源大氣擴散模型”計算衛生防護距離和大氣環境防護距離。 結果 懸浮顆粒物是燒結行業無組織排放源的主要特征污染物;在當?shù)亟?年平均風速分別為<2m/s、2~4m/s及>4m/s時,燒結企業衛生防護距離推薦值分別為1000m、900m、800m;在環境空氣質量功能一類區和二類區的大氣環境防護距離推薦值分別為800m與400m。 結論 通過對1989年標準的修訂和完善,推薦的燒結行業衛生防護距離對敏感區居民健康的保護是合理可行的。
[Abstract]:Objective to compare and analyze the difference between sanitary protection distance and atmospheric environmental protection distance in sintering industry, and to provide basis for establishing reasonable hygienic protection distance standard. Methods based on field investigation, the characteristics of pollutants in sintering enterprises were monitored. The surface concentration backstepping method and the point source atmospheric diffusion model were used to calculate the health protection distance and the atmospheric environmental protection distance respectively. Results suspended particulate matter was the main characteristic pollutant of non-organized emission source in sintering industry. When the local average wind speed in the last 5 years was < 2 m / s and > 4m/s, the recommended distance of health protection for sintering enterprises was 1 000 m / m ~ 900m ~ (-1) m ~ (-1) respectively. The recommended distance of atmospheric environmental protection in the first and second part of the ambient air quality function is 800m and 400m, respectively. Conclusion by revising and perfecting the 1989 standard, the recommended distance of health protection in sintering industry is reasonable and feasible to protect the health of residents in sensitive areas.
【學位授予單位】:武漢科技大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:R136
本文編號:2372539
[Abstract]:Objective to compare and analyze the difference between sanitary protection distance and atmospheric environmental protection distance in sintering industry, and to provide basis for establishing reasonable hygienic protection distance standard. Methods based on field investigation, the characteristics of pollutants in sintering enterprises were monitored. The surface concentration backstepping method and the point source atmospheric diffusion model were used to calculate the health protection distance and the atmospheric environmental protection distance respectively. Results suspended particulate matter was the main characteristic pollutant of non-organized emission source in sintering industry. When the local average wind speed in the last 5 years was < 2 m / s and > 4m/s, the recommended distance of health protection for sintering enterprises was 1 000 m / m ~ 900m ~ (-1) m ~ (-1) respectively. The recommended distance of atmospheric environmental protection in the first and second part of the ambient air quality function is 800m and 400m, respectively. Conclusion by revising and perfecting the 1989 standard, the recommended distance of health protection in sintering industry is reasonable and feasible to protect the health of residents in sensitive areas.
【學位授予單位】:武漢科技大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:R136
【參考文獻】
相關期刊論文 前2條
1 鄧小m,吳飚;衛生防護距離在環境影響評價中的計算[J];重慶環境科學;2003年12期
2 饒未欣;確定衛生防護距離應注意的問題[J];石油化工環境保護;1999年04期
本文編號:2372539
本文鏈接:http://sikaile.net/yixuelunwen/yufangyixuelunwen/2372539.html
最近更新
教材專著