醫用Mg-Zn-Gd合金微觀結構與腐蝕產物分析
[Abstract]:Background: magnesium alloy, as a metal internal fixation material, has a unique advantage of degradability, and its modulus of elasticity is similar to that of dense bone, which can avoid "stress shielding" effect, but for fracture internal fixation materials. Biological activity represents the ability to bond with bone in vivo, so it is of great significance to study it. Aim: to observe the microstructure of Mg-Zn-Gd alloy and the morphology and microanalysis of corrosion products in simulated body fluid. Methods: Mg-Zn-Gd alloy was prepared by melting casting alloying method. The microstructure of the alloy was observed by scanning electron microscope (SEM). The composition and precipitated phase of the alloy were analyzed by energy dispersive spectrometer (EDS). Results and conclusion: the as-cast Mg-Zn-Gd alloy consists of supersaturated 偽 -Mg solid solution and eutectic structure containing Gd and Zn elements. The eutectic structure is feathered, ellipsoid, fishbone and stripe distributed along grain boundaries. The main components of eutectic structure are Mg,Zn and Gd;. After immersion of Mg-Zn-Gd alloy in Hank's solution for 72 h, the surface of Mg-Zn-Gd alloy was deposited with OMg-CaOP element. By XRD diffraction analysis, Mg (OH) _ 2 phase was found on the surface film layer, which promoted the deposition of Ca containing salt. It is preliminarily proved that magnesium alloy has good biological activity.
【作者單位】: 天津市東麗區東麗醫院;黑龍江科技大學材料科學與工程學院;吉林大學白求恩醫學院;
【基金】:天津市衛生局項目(2011KZ70)~~
【分類號】:R318.08;R68
【參考文獻】
相關期刊論文 前10條
1 單玉郎;文九巴;姚懷;賀俊光;雷少帆;;Gd含量對Mg-0.5Zn-0.4Zr-xGd生物鎂合金性能的影響[J];材料熱處理學報;2016年06期
2 馮曉偉;戚文軍;黎小輝;李志成;;生物醫用擠壓態Mg-Zn-Gd鎂合金的組織與耐電化學腐蝕性能[J];中國腐蝕與防護學報;2016年03期
3 劉迎娟;余志永;韓彥龍;;力學環境對鎂合金降解的定性影響[J];河北聯合大學學報(自然科學版);2016年02期
4 趙輝;雷民;;新型可吸收鎂合金支架在血管內應用及生物相容性[J];中國組織工程研究;2016年08期
5 崔彤;管仁國;劉超杰;秦海明;宋福林;;Mg-4.0Zn-2.5Sr合金HA涂層體外降解及生物相容性[J];材料熱處理學報;2015年S2期
6 汪園園;馬愛斌;李玉華;邱超;江靜華;;可吸收醫用鎂合金縫合線的研究進展[J];功能材料;2015年S2期
7 馮曉偉;戚文軍;黎小輝;李志成;;Mg-Zn-Gd合金的微觀組織和力學性能[J];稀有金屬;2016年01期
8 趙虹;劉西偉;侯理達;Sergey PAVLINICH;李新林;李珍;李莉;;醫用鎂合金生物降解行為研究進展[J];材料導報;2013年19期
9 Lili Tan;Xiaoming Yu;Peng Wan;Ke Yang;;Biodegradable Materials for Bone Repairs:A Review[J];Journal of Materials Science & Technology;2013年06期
10 郭連平;陳樂平;尹健;吁艷林;;鋅含量對Mg-Gd-Zn合金鑄態組織和力學性能的影響[J];鑄造技術;2013年02期
相關博士學位論文 前2條
1 張廣道;AZ31B生物可降解鎂合金植入兔下頜骨生物學行為的實驗研究[D];中國醫科大學;2009年
2 劉勇;自生準晶增強Mg-Zn-Gd基合金組織和力學行為的研究[D];上海交通大學;2007年
相關碩士學位論文 前1條
1 程樂;Mg-Gd(Y)-Zn系多元合金相圖計算和實驗驗證[D];西安工業大學;2014年
【共引文獻】
相關期刊論文 前10條
1 楊樹杰;張潔;劉清華;王鈺;鄒俊波;章曉波;;熱處理對GZ60K鎂合金摩擦磨損性能的影響[J];材料熱處理學報;2017年05期
2 臧志海;尹冬松;安勇良;賈富;曲暢;;醫用Mg-Zn-Gd合金微觀結構與腐蝕產物分析[J];中國組織工程研究;2017年14期
3 王嵐;于振濤;王昌;余森;劉漢源;;生物醫用可降解鎂鋅合金研究進展[J];熱加工工藝;2017年08期
4 沈志遠;楊巍;;可降解鎂合金支架的研究進展及應用[J];疑難病雜志;2017年05期
5 章繼濤;;稀土Gd對Mg-5Zn-0.6Zr鎂合金鑄態組織與力學性能的影響[J];鑄造;2017年03期
6 Dong-song Yin;Yun-long Zhang;Yong-liang An;Zhen-ling Wang;Yun-zhou Hu;Ai-lian Liu;;Effect of high pressure on microstructure of cast Mg-8Zn-0.5Zr-0.5Gd alloy[J];China Foundry;2017年01期
7 馮宇飛;宋義全;安s,
本文編號:2372417
本文鏈接:http://sikaile.net/yixuelunwen/waikelunwen/2372417.html