利用三維數字化牙(牙合)模型對下頜牙弓及基骨形態的測量
發布時間:2019-01-05 03:13
【摘要】:目的: 1.利用三維數字化牙(?)模型測量下頜牙弓與基骨弓形的相互關系。 2.評價在模型測量中Andrews Molar Ruler的準確性、實用性及局限性。 3.觀察不同骨骼面型與牙弓及基骨弓形的相關關系。 4.利用三維數字化牙(?)模型測量正常(?)下頜FA點至WALA點間的距離,建立本地區人群該距離的正常值。 材料和方法: 選取46名成人(Model Ⅰ31人,Model Ⅱ15人,年齡20-28歲)作為研究對象。根據納入標準,自2012年至2014年山東省口腔醫院正畸科門診病人中,選取未有明顯下頜牙量骨量不調病人31例,作為Model Ⅰ;自2007級至2009級山東大學口腔醫學院學生中,選取15名個別正常(?)志愿者作為Model Ⅱ。 對所有受試者拍攝X線數字頭顱側位片,對其骨骼面型進行X線頭影測量。取得研究對象下頜模型并灌模,分別在右側第二磨牙至左側第二磨牙的每顆牙的FA點(代表牙弓)及相應的WALA點(代表基骨)粘結不銹鋼小球,并對其進行掃描,獲得三維數字模型。確定參考平面并獲得FA點和WALA點映射到參考平面上點的坐標值。采用Pearson相關性分析對所有受試者牙弓弓形與基骨弓形進行比較,探討二者間的相關關系。并利用Andrews Molar Ruler對同一受試者的模型進行測量,觀察其與數字化模型測量結果的一致性。測量Model Ⅰ中不同骨骼面型與牙弓及基骨弓形的相關關系,測量Model Ⅱ下頜各牙FA點至WALA點間距離,建立本地區人群該距離的正常值。 結果: 1.FA點和WALA點間的距離從尖牙至磨牙逐漸增大(0.14±1.04~3.42±0.59mm),表明下后牙負轉矩逐漸增大,與臨床觀察一致。 2.下頜牙弓弓形曲線與基骨弓形曲線存在高度相關性,在尖牙為r=0.794,磨牙區為r=0.923,尖牙區與磨牙區比值為r=0.720。 3.每個牙位區域的FA點和WALA點均是散在的,不能用統一的曲線來描述。且磨牙區的離散程度較大。 4.運用Andrews Molar Ruler測量石膏模型FA點與WALA點間距離與運用三維數字模型測量結果的一致性較高,可以用來測量后牙區FA與WALA點間的距離。 5.尖牙區基骨寬度與LANB存在中度負相關關系(r=-0.452);下頜中切牙FA點與WALA點間距與/ANB大小存在中度線性相關關系(r=-0.642),即隨著LANB的增大,下頜中切牙FA點與WALA點間距離的負值也隨之增大。 6.山東地區個別正常(?)下頜從中切牙至第二磨牙FA點至WALA點間距離分別為-1.53±0.92mm,-0.97±1.1lmm,0.65±0.90mm,1.17±0.64mm,2.13±0.93mm,3.12±0.72mm,3.55±0.54mm。 結論: 1.下頜牙弓弓形與基骨弓形是個性化的,基骨或牙弓在其形狀、曲率等參數上有很大變化,而不能用一種形狀歸納而來。 2.WALA點代表的基骨與FA點所代表的牙弓在尖牙間及磨牙間寬度上具有高度相關性。證明了WALA點可以作為預測臨床牙弓形狀的參考。
[Abstract]:Objective: 1. Using 3D Digital Tooth (?) The relationship between mandibular arch and basal arch was measured by model. 2. To evaluate the accuracy, practicability and limitation of Andrews Molar Ruler in model measurement. 3. To observe the relationship between different bone surface and arch and base bone. 4. Using 3D Digital Tooth (?) Model measurement is normal (?) The distance between FA point and WALA point of mandible was established to establish the normal value of this distance in local population. Materials and methods: 46 adults (Model 鈪,
本文編號:2401185
[Abstract]:Objective: 1. Using 3D Digital Tooth (?) The relationship between mandibular arch and basal arch was measured by model. 2. To evaluate the accuracy, practicability and limitation of Andrews Molar Ruler in model measurement. 3. To observe the relationship between different bone surface and arch and base bone. 4. Using 3D Digital Tooth (?) Model measurement is normal (?) The distance between FA point and WALA point of mandible was established to establish the normal value of this distance in local population. Materials and methods: 46 adults (Model 鈪,
本文編號:2401185
本文鏈接:http://sikaile.net/yixuelunwen/kouq/2401185.html
最近更新
教材專著