【摘要】：目的:建立上下頜骨、牙列、顳下頜關節、Advansync功能矯治器導下頜向前的有限元模型,探討在牙尖交錯位、下頜姿勢位和最大開口位狀態下,下頜骨向前移動的療效及對下切牙唇傾和解剖合平面的影響。方法:對牙列排齊整平后的安氏II類1分類患者,采用CBCT機(Cone beam CT)進行頭顱掃描,得到DICOM格式圖像數據。運用Mimics17軟件讀取獲得的DICOM格式數據,進行上下頜骨和牙列模型的初步建立,導出stl格式保存,導入Geomagic Studio2014軟件進行模型優化,使用三維建模軟件Unigraphics NX8.5軟件進行計算機圖像處理,將建立的三種頜位三維模型導入ANSYS Workbench15.0軟件中再次建立三種頜位的Advansync三維有限元模型并進行分析。結果:獲得在三種頜位下包含MBT直絲弓矯治器的Advansync功能矯治器前導下頜的三維有限元模型。在Advansync功能矯治器作用下,從閉口至大張口的運動過程中下頜骨、下切牙有向前向下移動的趨勢;解剖合平面趨向順時針的旋轉。結論:研究結果提示Advansync功能矯治器具有促進下頜骨整體向前向下改建的作用。
[Abstract]:Objective: to establish a finite element model of maxillary mandible, dentition and temporomandibular joint Advansync functional appliance to guide the mandible forward, and to explore the position of maxillary position and maxillary opening in the interlocking position of the cusp, mandible position and maximal opening position. Effect of mandibular forward movement and its effect on labial inclination and anatomic conjunctive plane of lower incisor. Methods: the patients with II class 1 were scanned by CBCT (Cone beam CT) to get the image data of DICOM format. Mimics17 software was used to read the data of DICOM format, to establish the upper and lower jaw and dentition models, to export the stl format to save, to import Geomagic Studio2014 software to optimize the model, and to use the 3D modeling software Unigraphics NX8.5 for computer image processing. The three kinds of 3D models of maxillary position were imported into ANSYS Workbench15.0 software and the Advansync 3D finite element model of three kinds of maxillary position was established and analyzed. Results: a three dimensional finite element model of Advansync functional orthodontic mandible with MBT straight wire appliance was obtained in three maxillary positions. Under the action of Advansync functional appliance, the lower incisor moved forward and downward during the movement from closing to opening, and the anatomic plane tended to rotate clockwise. Conclusion: the results suggest that Advansync functional appliance can promote the whole mandibular reconstruction.
【學位授予單位】：新疆醫科大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：R783.5

【參考文獻】

相關期刊論文 前10條

1 黃俊強;劉施瑤;江久匯;;Tweed-Merrifield技術矯治成人嚴重雙頜前突的療效評價[J];北京大學學報(醫學版);2016年03期

2 郝潔;邱賽男;于漢英;逯之瑤;金作林;;安氏Ⅱ~1與安氏Ⅱ~2錯牙合下頜骨生長旋轉的研究[J];臨床口腔醫學雜志;2016年03期

3 楊航;高娟;母紅;;下頜前伸矯治器矯治安氏Ⅱ類錯合的臨床分析[J];大家健康(學術版);2015年17期

4 盧新華;吳莉萍;許躍;謝永建;蔡斌;;不同垂直骨面型下切牙生理性調整的臨床研究[J];中華口腔正畸學雜志;2015年03期

5 鄧怡;張曉蓉;姚激;;遠中移動上牙列三維有限元研究[J];中國實用口腔科雜志;2015年08期

6 張婉君;李金源;馬永平;高林清;;口腔正畸中三維有限元法的發展[J];醫學研究與教育;2015年03期

7 王波;張桂香;石晶;彭惠;張瑩;;自鎖托槽矯治器矯治初期上頜異位側切牙及牙周組織應力的三維有限元分析[J];國際口腔醫學雜志;2015年04期

8 田曉光;王蕾;魚敏;段銀鐘;;Forsus矯治器治療骨性下頜后縮口腔功能間隙變化的研究[J];中國美容醫學;2015年09期

9 何琳;王海艷;肖聰;葛伶伶;李新;;構建上頜第一磨牙及牙周支持組織的有限元模型[J];中國組織工程研究;2015年20期

10 周子凌;張淵;石利強;楊磊;劉海波;丁寅;;咬合接觸對顳下頜關節應力分布影響的三維有限元分析[J];中華口腔醫學雜志;2015年05期

，

本文編號：2253652