發布時間：2018-09-05 18:12

【摘要】：目的:探討控根輔弓對直絲弓矯治器患者的上頜切牙轉矩效果。方法:選擇22例安氏Ⅱ1拔牙矯治的患者,采用直絲弓矯治器矯治,在精細調整階段配合控根輔弓對過度直立或內傾的上頜切牙進行正轉矩。按主弓絲不同分為2組,14例主弓絲為0.46 mm×0.64 mm的不銹鋼方絲,8例主弓絲為0.46 mm的不銹鋼圓絲。對22例上頜切牙轉矩前后的X線頭影測量結果采用t檢驗進行統計分析。結果:22例上頜切牙轉矩后的X線頭影測量結果顯示,1-SN、UIa-NA值增加(P0.01),控根輔弓對上切牙的正轉矩效果明顯;轉矩的時間,主弓絲為圓絲上頜切牙轉矩快于主弓絲為方絲,P0.05。結論:在直絲弓矯治的精細調整階段,配合前牙控根輔弓,是對內收后過度直立或舌傾的上頜切牙實現轉矩的簡單、有效的方法。
[Abstract]:Objective: to investigate the effect of root control auxiliary arch on maxillary incisor torque in patients with straight wire appliance. Methods: a total of 22 patients were treated with straight wire appliance. The maxillary incisors with excessive upright or introverted maxillary incisors were subjected to positive torque at the stage of fine adjustment with root control auxiliary arch. According to the main arch wire, 14 cases of stainless steel square wire with 0.46 mm 脳 0.64 mm of main arch wire were divided into two groups. Eight cases of stainless steel round wire with 0.46 mm main arch wire were divided into two groups. Twenty-two cases of maxillary incisor torque before and after X-ray cephalometric results were statistically analyzed by t test. Results the X-ray cephalometric measurements of 22 maxillary incisors showed that the value of UIa-NA was increased (P0.01), and the positive torque of the upper incisors was significantly improved by the root control and auxiliary arch, and the torque of the maxillary incisors was faster than the square wire (P0.05). Conclusion: it is a simple and effective method to realize the torque of maxillary incisors with the aid of root control of anterior teeth in the fine adjustment stage of straight-wire orthodontics.
【作者單位】： 常州市口腔醫院正畸科;連云港市第一人民醫院口腔科;南京軍區南京總醫院口腔科;南京醫科大學口腔醫學研究所;南京醫科大學附屬口腔醫院正畸科;
【基金】：江蘇省高校優勢學科建設工程資助(編號:2014-37)
【分類號】：R783.5

【參考文獻】

相關期刊論文 前8條

1 楊敏志,許天民,林久祥;正畸治療后滿意病例牙齒轉矩角的三維測量研究[J];北京大學學報(醫學版);2003年05期

2 黃寧;辜岷;韓向龍;白丁;;正畸方絲轉矩力的分析[J];華西口腔醫學雜志;2008年02期

3 楊新海,曾祥龍;直絲弓托槽粘貼高度對轉矩角影響的研究[J];口腔正畸學;1999年02期

4 張忠;;轉矩方弓和交互牽引矯治磨牙深覆蓋的臨床研究[J];口腔醫學研究;2006年06期

5 張燕琴;林新平;;微螺釘結合片段弓技術內收上前牙的臨床研究[J];口腔醫學研究;2013年05期

6 楊敏志;許天民;林久祥;;不同垂直骨面型錯鉭矯治后牙鉭的補償[J];實用口腔醫學雜志;2005年06期

7 羅小安;鄭曉丹;史建陸;;牙列重度擁擠伴下頜左偏的正畸矯治1例[J];實用口腔醫學雜志;2011年02期

8 白丁,辜岷,張劍;固定矯治器中切牙轉矩的控制[J];中華口腔醫學雜志;2004年02期

【共引文獻】

相關期刊論文 前10條

1 李廣U，

本文編號：2225057