本文選題：臨時冠材料 + 微波��； 參考：《實用口腔醫學雜志》2014年01期

【摘要】：目的:探討微波和水浴處理對聚甲基丙烯酸甲酯及雙甲基丙烯酸復合樹脂臨時冠材料殘留單體量的影響。方法:2種材料各制備50 mm×30 mm×2 mm長方體9個,分成3組。對照組不處理;微波組在500 W微波條件下處理3 min;水浴組在55℃水中恒溫浸泡30 min。獲取試件浸提液后用高效液相色譜儀檢測殘留單體量。結果:聚甲基丙烯酸甲酯材料殘留單體質量百分比:微波組(0.21%±0.07%)和水浴組(0.99%±0.17%)均小于對照組(2.60%±0.61%),組間兩兩比較P0.01。雙甲基丙烯酸復合樹脂材料殘留單體質量百分比3組皆小于0.10%。結論:微波和水浴處理可有效降低聚甲基丙烯酸甲酯殘留單體量;雙甲基丙烯酸復合樹脂臨時冠材料無需微波和水浴處理。
[Abstract]:Objective: to investigate the effect of microwave and water bath treatment on the residual monomer content of polymethyl methacrylate and dimethacrylic acid composite resin. Methods 9 cuboids of 50 mm 脳 30 mm 脳 2 mm were prepared from two kinds of materials, and were divided into 3 groups. The control group was not treated, the microwave group was treated with 500W microwave for 3 min, and the water bath group was immersed in constant temperature at 55 鈩，

本文編號：1942561