本文關鍵詞： 3D打印 微納復合結構 骨髓間充質干細胞 成骨　出處：《浙江大學》2017年碩士論文　論文類型：學位論文

【摘要】：目的:研究鈦表面微納復合結構對大鼠骨髓間充質干細胞黏附、增殖以及成骨分化的影響。方法:采用水熱法利用鈦酸四丁酯為鈦源,在酸蝕過的3D打印鈦片上生成二氧化鈦納米棒結構。其表面微納復合拓?fù)浣Y(jié)構采用掃描電鏡(SEM)進行檢測。通過倒置熒光顯微鏡觀察、CCK-8輔助檢測不同表面細胞黏附、增殖情況。采用Realtime PCR檢測各組細胞成骨分化相關基因RUNX2、ColⅠ、OTC的表達水平。結果:SEM可見微納復合結構鈦片表面納米級棒狀結構,酸蝕過的3D打印鈦片表面具有微米尺度的粗糙度,金鋼砂紙打磨普通鈦片表面較為平整光滑。各組孵育大鼠BMSCs24h后檢測示微納復合結構對細胞伸展更加有利,而黏附的細胞數低于普通鈦片組,cck-8結果與之相符;72h后檢測示微納復合結構不僅促進細胞增殖遠高于普通鈦片組,細胞平鋪展開面積也是其兩倍,而3D鈦片酸蝕組各項均處于中間值。第七天檢測成骨基因表達水平示,3D鈦片酸蝕組和微納復合結構組三種基因的表達都遠多于普通鈦片組,差異具有顯著性,同時微納復合結構組三種基因表達均高于3D鈦片酸蝕組。結論:微納復合結構有利于細胞增殖以及細胞伸展,同時更利于細胞向成骨方向分化。推測其可能原因在于,基于3D打印所制備的微米表面具有更易為細胞所識別的粗糙度,同時,微納復合結構為細胞提供了生理三維仿生環境,有利于細胞鋪展以促進其更好地增殖與分化。
[Abstract]:Objective: to study the effect of titanium surface microcomposite structure on the adhesion, proliferation and osteogenic differentiation of rat bone marrow mesenchymal stem cells. Methods: tetrabutyl titanate was used as titanium source by hydrothermal method. Titanium dioxide nanorods were formed on the acid etched 3D printed titanium wafer. The surface micro-nano composite topology was detected by scanning electron microscopy (SEM). CCK-8 was used to detect cell adhesion on different surfaces. Proliferation. Realtime PCR was used to detect the expression level of osteoblast differentiation related gene RUNX2Col 鈪，

本文編號：1533459