反沖模擬試驗系統動力學分析
本文選題:模擬試驗 + 數值仿真 ; 參考:《中北大學》2017年碩士論文
【摘要】:反沖模擬試驗系統最初應用在火炮緩沖器研究上,相較實彈發射,模擬試驗系統只需要很小裝藥量,就可以實現與實彈發射近似的動態效果,在自動武器的研制中有著廣泛的應用。模擬試驗技術不僅可以模擬火炮射擊時的動態力,還可以模擬出類似的強沖擊力,例如沖壓設備工作時的強振動、飛機著陸時起落架所承受的強沖擊等。隨著試驗系統的技術要求日漸提高,以往的模擬試驗系統無法滿足現實應用,結構急需改進。本文在前人研究的基礎上,分析試驗系統工作原理及運動過程,引入新的方案,設計一套新型模擬試驗系統,以滿足現實應用中的新要求。根據技術要求中的各項指標,在以往的結構基礎上進行改進,設計出一套新的方案。試驗系統在運行時能夠?qū)崿F(xiàn)一系列復雜動作來保證各項技術指標。依照結構方案完成模擬試驗系統的三維建模,分別闡述各部件的結構特點,并從模擬試驗中的動力加載過程、部件運動過程兩部分詳細說明系統如何實現工作要求,然后對系統的整體運行過程進行數學建模,再將數學模型編制成計算機程序?qū)霐?shù)值分析軟件MATLAB中,利用其強大的計算能力進行數值仿真。將仿真試驗計算分為理想工況、單周期試驗、多周期試驗三組進行,得到的三組仿真結果數據相互對比研究用以評估試驗系統的結構設計是否合理有效。仿真數據對比研究表明,各項結果數據誤差均在合理范圍內,建立的試驗系統動力學模型可靠,試驗系統結構設計方案可行,對其他緩沖器的模擬試驗具有一定的借鑒意義。
[Abstract]:The recoil simulation test system was initially applied to the study of gun buffers. Compared with the firing of live ammunition, the simulation test system requires only a very small charge, and can achieve a dynamic effect similar to that of live ammunition firing.In the development of automatic weapons has a wide range of applications.The simulation test technique can not only simulate the dynamic force of the artillery fire, but also simulate the similar strong impact force, such as the strong vibration of the punching equipment and the strong impact of the landing gear during the landing of the aircraft, etc.With the increasing technical requirements of the test system, the previous simulation test system can not meet the practical application, and the structure needs to be improved.On the basis of previous studies, this paper analyzes the working principle and motion process of the test system, introduces a new scheme and designs a new simulation test system to meet the new requirements in practical applications.According to the indexes of technical requirements, a new scheme is designed based on the previous structure.The test system can realize a series of complex actions to ensure each technical index.According to the structural scheme, the three-dimensional modeling of the simulation test system is completed, and the structural characteristics of each component are expounded, and the dynamic loading process and the motion process of the components in the simulation test are described in detail to explain how the system realizes the working requirements.Then the whole running process of the system is modeled and then the mathematical model is programmed into the numerical analysis software MATLAB and its powerful computing power is used to carry out the numerical simulation.The simulation test was divided into three groups: ideal working condition, single cycle test and multi-period test. The three groups of simulation results were compared to evaluate whether the structural design of the test system was reasonable and effective.The comparative study of simulation data shows that the error of each result data is within a reasonable range, the dynamic model of the test system is reliable and the design scheme of the test system structure is feasible, which has certain reference significance for the simulation test of other buffers.
【學位授予單位】:中北大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:N941.3
【相似文獻】
相關期刊論文 前10條
1 趙松濤,韓松;土的凍融深度熱模擬試驗法[J];黑龍江水利科技;1994年Z1期
2 于培彥;一類抽檢方案的統計模擬試驗[J];寧夏農學院學報;2002年01期
3 蔣衛東;;發明設想的簡單試制法[J];發明與創新(綜合版);2006年06期
4 岑成德;;運用統計分析軟件進行教學模擬試驗的設計[J];統計與決策;2008年14期
5 張幸農;陳長英;假冬冬;應強;張思和;;流滑型窩崩特征及概化模擬試驗[J];水利水運工程學報;2011年04期
6 苗愛梅,李韜光,張紅雨,何翰原,駱麗楠;CAPPS在太原市本地化過程中的改進和應用[J];應用氣象學報;2004年03期
7 周世恩;;陡立低阻巖體夾層的直流電阻率異常特征——以松桃縣干串村成井物探為例結合模擬試驗分析總結[J];企業技術開發;2014年08期
8 聶云鵬;;俄520天全封閉“登火星”模擬試驗2010年啟動[J];前沿科學;2009年04期
9 陳海山,孫照渤;青藏高原單點地氣交換過程的模擬試驗[J];高原氣象;2005年01期
10 ;[J];;年期
相關會議論文 前6條
1 陳強洪;王星剛;彭剛;;再入飛行狀態模擬試驗平臺設計[A];中國工程物理研究院科技年報(2005)[C];2005年
2 王成;;大直徑水平荷載樁的計算機模擬試驗[A];中國公路學會橋梁和結構工程學會2001年橋梁學術討論會論文集[C];2001年
3 謝歡;周歧斌;;交流SPD失效模擬試驗過程講解與結果分析[A];第31屆中國氣象學會年會S9 第十二屆防雷減災論壇——雷電物理防雷新技術[C];2014年
4 包承綱;饒錫保;李玫;丁金華;;離心模擬試驗及若干應用特例[A];中國水利學會2007學術年會物理模擬技術在巖土工程中的應用分會場論文集[C];2007年
5 劉志友;徐國;陳建民;侯敏杰;;大飛機動力高空模擬試驗中推力的確定方法[A];大型飛機關鍵技術高層論壇暨中國航空學會2007年學術年會論文集[C];2007年
6 汪仁和;楊平;;深軟土凍土擋土墻的模擬試驗與研究[A];地層凍結工程技術和應用——中國地層凍結工程40年論文集[C];1995年
相關重要報紙文章 前1條
1 灣月;寒潮下點燃勝利之火[N];中國航天報;2009年
相關碩士學位論文 前2條
1 王澤坤;反沖模擬試驗系統動力學分析[D];中北大學;2017年
2 王慧敏;大口徑鉆進軟質巖層相似材料模擬研究[D];中南大學;2010年
,本文編號:1735321
本文鏈接:http://sikaile.net/shoufeilunwen/benkebiyelunwen/1735321.html