本文選題：聚硅酸鋁鎂　切入點：羧甲基纖維素鈉　出處：《精細化工》2017年09期 　論文類型：期刊論文

【摘要】：以硅酸鈉、硫酸鋁、硫酸鎂、羧甲基纖維素鈉為原料,制備了聚硅酸鋁鎂-羧甲基纖維素鈉(PSi AM-CMC)無機-有機復合絮凝劑并應用于模擬的松花江水樣的處理。結果表明,在n(Al+Mg)/n(Si)=0.6、n(Mg)∶n(Al)=1∶4、m(CMC)/m(Si)=0.3、羧甲基纖維素鈉糊化溫度為60℃、p H=2的條件下,制備的PSi AM-CMC對模擬江水的絮凝效果最好,色度、濁度去除率可達98%以上。采用SEM、FTIR、XRD對絮凝劑的結構進行表征,結果表明,PSi AM-CMC不是聚硅酸、金屬鹽和羧甲基纖維素鈉的混合物,而是通過縮聚和配位反應,形成的一種兼具無機和有機絮凝劑優點的物質。
[Abstract]:Using sodium silicate, aluminum sulfate, magnesium sulfate and sodium carboxymethyl cellulose as raw materials, the inorganic organic compound flocculant PSiAM-CMC was prepared and applied to the treatment of simulated Songhua River water sample. Under the conditions that the ratio of PSi / Mg-C / N is 0.6%, and the gelatinization temperature of sodium carboxymethyl cellulose is 60 鈩，

本文編號：1641880