發布時間：2018-03-22 13:22

  本文選題：制造業　切入點：減排潛力　出處：《現代管理科學》2016年11期 　論文類型：期刊論文

【摘要】：深圳市制造業碳排放約占當前深圳市排放總量的三分之一,制造業的減排對于全市實現碳排放峰值至關重要。文章以深圳市制造業500家企業調研數據為基礎,篩選出57項可實施的節能減排技術,分析這些技術2030年可能的減排潛力和成本。結果表明,2030年57項技術的碳減排潛力約為2 891.3萬噸CO2,其對應投資額為582.6億元�？刂乒芾砑夹g、注塑技術及溫控技術三類技術占潛力的三分之二。最后采用最優化數學方法進行建模,探究了深圳市制造業碳減排的最優路徑。
[Abstract]:Manufacturing carbon emissions in Shenzhen account for about 1/3 of the total emission in Shenzhen at present, and the emission reduction in manufacturing industry is of great importance to the realization of peak carbon emissions in the whole city. This paper is based on the survey data of 500 manufacturing enterprises in Shenzhen. 57 feasible energy-saving and emission reduction technologies were selected, and the potential and cost of these technologies were analyzed in 2030. The results show that the carbon emission reduction potential of 57 technologies in 2030 is about 2 8.913 million tons of CO2, and the corresponding investment is 58.26 billion yuan. Injection molding technology and temperature control technology account for 2/3 of the potential. Finally, the optimal path of carbon emission reduction in Shenzhen manufacturing industry is explored by using the optimal mathematical method.
【作者單位】： 北京大學深圳研究生院;北京大學深圳研究生院環境與能源學院;
【基金】：重點項目:深圳市環境科研項目(項目號:4403012012000227)
【分類號】：F427
，

本文編號：1648828