height to diameter ratio underflow concentration deep cone t
本文關鍵詞:基于高徑比的深錐濃密機底流濃度數學模型,由筆耕文化傳播整理發布。
基于高徑比的深錐濃密機底流濃度數學模型
Mathematical Model of Deep Cone Thickener Underflow Concentration Based on the Height to Diameter Ratio
[1] [2] [3]
WANG Yong,WANG Hong-jiang,WU Ai-xiang(School of Civil and Environment Engineering,University of Science and Technology Beijing,Beijing 100083,China)
北京科技大學土木與環境工程學院,北京100083
文章摘要:深錐濃密機是膏體處置技術的關鍵設備,高徑比是影響底流濃度的重要因素,有必要探討高徑比與底流濃度之間的關系。以集料物理特性參數平均取值所需深錐濃密機高徑比為基準,建立一種基于高徑比的深錐濃密機底流濃度數學模型。該模型的核心是對修正系數A的取值,為了便于理論求解修正系數A,構建了一個理論壓縮模型,借助理論壓縮模型,計算修正系數A的理論值為5.43%;采用深錐模型實驗求得系數A的值為5.14%,與理論計算值高度吻合。選取兩臺具有代表性的深錐濃密機參數對模型進行檢驗,結果表明,該模型對深錐膏體濃密機底流濃度預測較為可靠。
Abstr:The deep cone thickener is the key equipment in the paste disposal technology.The height to diameter ratio is an important factor which influences the thickener's underflow concentration.So it is necessary to analyze the relationship between each other.Based on the aggregate's average physical parameters required that the height to diameter ratio,a mathematical model of deep cone thickener underflow concentration is established.The core of this model is for the correction coefficient A's value.So a theory compaction model is built for easily to solve the correction coefficient A's value.The A's theoretical calculation is 5.43% by this theory compaction model.And A's laboratory experiment result is 5.14% by using deep cone model.That is highly matched with the theoretical calculated value.Then this model was tested by two typical deep cone thickeners.The results show that the model can predict the underflow concentration of deep cone thickener reliably.
文章關鍵詞:
Keyword::height to diameter ratio underflow concentration deep cone thickener mathematical model theory compaction model
相關文章:
[1] 基于模糊數學的采礦方法優化研究 《黃金科學技術》 2010年06期
[2] 采空區三維探測建模及采場回采指標可視化計算 《礦業研究與開發》 2011年01期
[3] 地下金屬礦山集成化采場安全生產管理系統 《金屬礦山》 2011年04期
[4] 地下礦山職業危害評價體系的研究 《金屬礦山》 2011年04期
[5] 直孔雙心掏槽法在金屬礦山的應用探討 《礦業快報》 2011年04期
[6] 開采方法對資源回收率的影響 《礦業科學技術》 2010年04期
[7] 巴魯巴銅礦采礦方法的優化研究 《礦業工程》 2011年03期
[8] 基于SURPAC的礦山開采穩定性FLAC3D模型與模擬 《地下空間與工程學報》 2011年02期
課題項目:國家自然科學基金(50934002); 創新團隊計劃(2006BAB02A01); 新世紀優秀人才支持計劃(NECT-07-0070)
作者信息:會員可見
本文關鍵詞:基于高徑比的深錐濃密機底流濃度數學模型,由筆耕文化傳播整理發布。
,本文編號:228292
本文鏈接:http://sikaile.net/kejilunwen/yysx/228292.html