在可見光通信系統中,游程長度受限碼可用于促進可靠的數據傳輸并提供無閃爍照明。本文提出新穎的高碼率游程長度受限碼,以改善傳輸系統的誤碼率性能以及減少光信號閃爍�；谟邢逘顟B(tài)機設計原理,通過優化最小漢明距離和利用狀態分裂法獲取較小狀態數,提出兩種游程長度受限碼編碼方案以獲得高編碼增益。在游程長度受限碼的編碼設計方案中,碼字集的構造至關重要;在碼字集的設計中引入集合劃分算法準則。詳細描述各種游程長度受限碼的閃爍特性和最小漢明距離,并基于直方圖比較不同碼字的閃爍性能。最后,基于開關鍵控調制的可見光通信系統對所提游程長度受限碼作仿真驗證及性能分析。仿真結果表明,與現有游程長度受限碼相比,在閃爍控制約束下,所提游程長度受限碼的誤碼性能更優。 

【文章來源】：Frontiers of Information Technology & Electronic Engineering. 2020,21(09)EISCICSCD

【文章頁數】：16 頁

【文章目錄】：
1 Introduction
2 RLL code design using finite-state machines
    2.1 Finite-state machines
    2.2 High-rate RLL code design with two states
3 RLL code design with large dmin
    3.1 High-rate codes with dmin=3 and small state numbers
        3.1.1 Set-partitioning algorithm
        3.1.2 FSM design for rate(n-1)/n RLL codes with dmin=3 and small state numbers
    3.2 High-rate codes with dmin=4 and small state numbers
4 Flicker analysis and simulation re-sults
    4.1 System model
    4.2 Flicker analysis
    4.3 Simulation results
5 Conclusions
Contributors
Compliance with ethics guidelines
Appendix A:Possible mapping codes for the rate 4/5 and rate 5/6 RLL codes
Appendix B:Brightness level for referenced RLL codes



本文編號：3248955