本文選題：可見光通信 + 照明均勻率��； 參考：《光通信技術》2017年03期

【摘要】：在室內可見光通信(VLC)系統滿足照度標準的情況下,采用控制變量法來改變LED芯片的數目和布局來優化光學前端的設計,得到更均勻的光照度分布,改善接收功率的波動程度。通過對房間內某點的歸一化沖激響應結果分析,得到VLC系統的性能主要受直射光的影響。在視距鏈路中對接收面的光照度和接收功率進行仿真,驗證了最優化光源布局設計方案。
[Abstract]:When the indoor visible light communication system meets the illumination standard, the control variable method is used to change the number and layout of the LED chip to optimize the design of the optical front end, to obtain a more uniform light intensity distribution and to improve the fluctuation degree of the received power. By analyzing the results of normalized impulse response at some point in the room, it is concluded that the performance of VLC system is mainly affected by direct light. The illumination and power of the receiving plane are simulated in the line-of-sight link to verify the optimal light source layout design.
【作者單位】： 上海理工大學光電信息與計算機工程學院;
【分類號】：TN929.1

【相似文獻】

相關碩士學位論文 前1條

1 呂雁鵬;硅酸鹽鋁酸鹽熒光粉的制備及發光性能研究[D];華東師范大學;2016年

，

本文編號：1913544