本文選題：彈道目標成像　切入點：滑動散射中心模型　出處：《雷達科學與技術》2017年05期 　論文類型：期刊論文

【摘要】：彈道導彈識別是彈道防御系統中的核心問題之一,直接關系到導彈防御系統的成敗。如果能對彈道目標成像,則能獲得關于目標結構更為豐富的信息。由于彈道目標具有高速自旋的特點,因此基于轉臺模型的逆合成孔徑雷達成像技術對高速自旋目標成像是失效的。針對該問題,詳細分析了彈道目標回波模型,并研究了彈道目標時頻圖的調制規律,在此基礎上,提出一種基于微多普勒信息的彈道目標成像方法,實現了對彈道目標二維強散射中心的重構,仿真數據處理結果證明了所提方法的有效性。
[Abstract]:Ballistic missile identification is one of the core problems in ballistic defense system, which is directly related to the success or failure of missile defense system. Because the ballistic target has the characteristics of high speed spin, the inverse synthetic Aperture Radar imaging technology based on the turntable model is ineffective for the imaging of the high speed spin target. The echo model of ballistic target is analyzed in detail, and the modulation law of time-frequency diagram of ballistic target is studied. On this basis, a new imaging method of ballistic target based on micro-Doppler information is proposed. The reconstruction of two-dimensional strong scattering center of ballistic target is realized, and the validity of the proposed method is proved by the simulation data processing.
【作者單位】： 中國電子科技集團公司第三十八研究所;孔徑陣列與空間探測安徽省重點實驗室;智能情報處理重點實驗室;
【分類號】：TJ761.3;TN957.52
，

本文編號：1606679