本文選題：智能照明　切入點：傳感網絡　出處：《現代電子技術》2017年11期 　論文類型：期刊論文

【摘要】：針對當前的照明系統存在智能化程度低、調節能力差的問題,導致能耗較高,提出一種基于Zig Bee無線傳感網絡的智能照明系統設計方法,根據外面環境中的亮度、能見度、污染物濃度等參數構造智能化控制模型,以照明系統的輸出功率為約束條件,引入占空比控制算法,對最佳節能點進行尋優,通過迭代計算,配合傳感器節點硬件模塊進行智能化調節。以真實模塊為例進行測試,設計的系統可以智能化地調節照明系統的工作條件,最大程度的節約能源,達到實用要求。
[Abstract]:In view of the problems of low intelligence and poor adjustment ability in the current lighting system, a design method of intelligent lighting system based on Zig Bee wireless sensor network is proposed, which is based on the brightness and visibility in the outside environment. The intelligent control model is constructed by using pollutant concentration and other parameters. With the output power of lighting system as the constraint condition, the duty cycle control algorithm is introduced to optimize the optimal energy saving point, and the iterative calculation is carried out. Taking the real module as an example, the system can intelligently adjust the working conditions of the lighting system, save energy as much as possible, and meet the practical requirements.
【作者單位】： 燕山大學電氣工程學院;河北建材職業技術學院機電工程系;
【基金】：2016年秦皇島市科技局:基于ZigBee的智能照明系統設計(201602A032)
【分類號】：TN92;TP212.9
，

本文編號：1572235