環氧樹脂固化工藝條件對YBCO超導帶材臨界電流的影響
發布時間:2019-05-18 21:36
【摘要】:為了研究固化條件對超導帶材臨界電流的影響,采用電測法實驗測量了多種固化工藝條件下YBCO高溫超導帶材的臨界電流。分析得到熱處理溫度140℃時,超導帶臨界電流出現明顯退化,溫度越高退化越明顯;超導帶臨界電流隨著固化時間的延長而降低,處理溫度越高,隨時間下降的幅度越大,并從超導體釘扎效應的角度對實驗結果進行了初步的分析。
[Abstract]:In order to study the effect of curing conditions on the critical current of superconducting strip, the critical current of YBCO high temperature superconducting strip under various curing conditions was measured by electric measurement method. It is found that when the heat treatment temperature is 140 鈩,
本文編號:2480357
[Abstract]:In order to study the effect of curing conditions on the critical current of superconducting strip, the critical current of YBCO high temperature superconducting strip under various curing conditions was measured by electric measurement method. It is found that when the heat treatment temperature is 140 鈩,
本文編號:2480357
本文鏈接:http://sikaile.net/kejilunwen/wulilw/2480357.html
最近更新
教材專著