【摘要】：為了解決氧氣A吸收帶被動測距中使用高光譜成像系統存在測量實時性差的問題,提出了一種氧氣A吸收帶平均透過率的多光譜非成像測量方法。該方法利用3個窄帶濾光片分別采集目標位于氧氣A吸收帶及其左右?guī)Ъ绲妮椛鋸姸刃畔�。選擇光電倍增管作為光電轉換器件,在外場條件下開展氧氣A吸收帶平均透過率測量實驗。建立了氧氣A吸收帶透過率的逐線積分模型,通過對比實驗測量值與模型理論值驗證了該方法的可行性。對比結果表明,在測量距離為100~400m范圍內,氧氣A吸收帶平均透過率的測量誤差在0.146%~1.576%之間,證明了該方法的可行性。
[Abstract]:In ord to solve that problem of poor real-time measurement of the high-spectral imaging system in the passive ranging of the oxygen-A absorption band, a multi-spectral non-imaging measurement method with an average transmittance of the oxygen A absorption band is proposed. The method uses three narrow-band filters to respectively collect the radiation intensity information of the target at the oxygen absorption band and the left and the right shoulder. The photoelectric conversion device was selected as the photoelectric conversion device, and the average transmittance of the oxygen-A absorption band was measured under the field condition. A line-by-line integral model of the transmittance of the oxygen A absorption band is established, and the feasibility of the method is verified by comparing the experimental measurement and the theoretical value of the model. The comparison results show that the measurement error of the average transmittance of the oxygen-A-absorption band is between 0.146% and 1.576% in the range of 100-400m, and the feasibility of the method is proved.
【作者單位】： 軍械工程學院電子與光學工程系;北京系統工程研究所;裝甲兵工程學院控制工程系;
【基金】：河北省自然科學基金(F2016506014)
【分類號】：O433;TP391.41

【相似文獻】

相關碩士學位論文 前2條

1 蘇方才;PDP選擇性光學薄膜的制備及特性研究[D];電子科技大學;2015年

2 侯林艷;F摻雜Zn-Sn-O系透明導電氧化物薄膜的研究[D];華北理工大學;2015年

，

本文編號：2384252