【摘要】：絞刀的吸入性能極大影響疏浚工程的施工效率,研究絞刀內的流動特性對提高絞刀吸入性能意義重大。采用雷諾時均納維斯托克斯(RANS)湍流模型的計算流體動力學(CFD)方法,對絞刀刀臂處是否帶有溝槽設計的2種結構形式絞刀內部流動進行數值模擬,對2款絞刀內部的流動特性進行對比分析,驗證溝槽設計的合理性及優越性,為5 000 k W挖巖絞刀的優化設計提供技術支持。
[Abstract]:The suction of the cutter can greatly affect the construction efficiency of the dredging project. It is of great significance to study the flow characteristics in the cutter to improve the suction performance of the cutter. Using the computational fluid dynamics (CFD) method of (RANS) turbulence model at Renault time, numerical simulation is carried out on the internal flow of the cutter with or without grooves. The flow characteristics of the two types of cutters are compared and analyzed to verify the rationality and superiority of the groove design and provide technical support for the optimization design of 5 000 kW rock cutters.
【作者單位】： 中交天津港航勘察設計研究院有限公司天津市疏浚工程技術企業重點實驗室;
【分類號】：U615.3
，

本文編號：2377696