基于CATIA二次開發的重力壩三維模型構建
發布時間：2018-12-14 00:55
【摘要】：為實現不同方案下重力壩三維模型的快速構建,利用VB編程語言對CATIA三維建模軟件進行二次開發,通過自動化對象編程(V5Automation)接口完成VB與CATIA的連接,以VB程序驅動CATIA軟件的相關組件,構建重力壩三維模型。建模采用自上而下的骨架設計思路,對傳統的裝配方式進行改進,建立重力壩整體骨架對各壩段的約束,并結合CATIA軟件的參數化設計特點論述多種方案下重力壩三維模型的快速建立方法,并以西藏某水電站為例構建了三種重力壩的典型布置方案。結果表明,使用CATIA二次開發技術能夠快速、準確、智能地完成重力壩三維模型的構建,且可快速完成不同設計方案的優化與比選。
[Abstract]:In order to realize the fast construction of gravity dam 3D model under different schemes, the CATIA 3D modeling software is redeveloped by using VB programming language, and the connection between VB and CATIA is completed by means of the automatic object programming (V5Automation) interface. The 3D model of gravity dam is constructed by using VB program to drive the related components of CATIA software. The modeling adopts the top-down skeleton design idea, improves the traditional assembly method, and establishes the restriction of gravity dam integral skeleton to each dam segment. Combined with the parameterized design characteristics of CATIA software, this paper discusses the rapid establishment method of 3D model of gravity dam under various schemes, and takes a hydropower station in Tibet as an example to construct three typical layout schemes of gravity dam. The results show that the 3D model of gravity dam can be constructed quickly, accurately and intelligently by using CATIA secondary development technology, and the optimization and comparison of different design schemes can be completed quickly.
【作者單位】： 三峽大學水利與環境學院;
【基金】：三峽大學研究生科研創新基金(SDYC2015016)
【分類號】：TV642.3;TP391.7
本文編號：2377588
[Abstract]:In order to realize the fast construction of gravity dam 3D model under different schemes, the CATIA 3D modeling software is redeveloped by using VB programming language, and the connection between VB and CATIA is completed by means of the automatic object programming (V5Automation) interface. The 3D model of gravity dam is constructed by using VB program to drive the related components of CATIA software. The modeling adopts the top-down skeleton design idea, improves the traditional assembly method, and establishes the restriction of gravity dam integral skeleton to each dam segment. Combined with the parameterized design characteristics of CATIA software, this paper discusses the rapid establishment method of 3D model of gravity dam under various schemes, and takes a hydropower station in Tibet as an example to construct three typical layout schemes of gravity dam. The results show that the 3D model of gravity dam can be constructed quickly, accurately and intelligently by using CATIA secondary development technology, and the optimization and comparison of different design schemes can be completed quickly.
【作者單位】： 三峽大學水利與環境學院;
【基金】：三峽大學研究生科研創新基金(SDYC2015016)
【分類號】：TV642.3;TP391.7
【相似文獻】
相關期刊論文 前5條
1 周鵬程;王瑞玲;;Google Earth在工程設計中的應用[J];河北水利;2012年09期
2 趙中原;張強勇;;水利工程三維模型試驗變形的數碼攝影監測[J];水電能源科學;2009年05期
3 王克成,楊德健;堆石壩三維模型動力性態及抗震穩定性研究[J];水利學報;1987年10期
4 于賀海;劉德亮;趙琳;王嵩;;渾河沈陽城市段三維數字模型系統技術研究[J];現代農業科技;2009年07期
5 ;[J];;年期
相關會議論文 前1條
1 余錫平;;近岸水波的數學建模[A];第十四屆全國水動力學研討會文集[C];2000年
相關碩士學位論文 前1條
1 關莉莉;水閘三維模型的建立及應用[D];鄭州大學;2015年
，本文編號：2377588
本文鏈接：http://sikaile.net/kejilunwen/shuiwenshuili/2377588.html
最近更新
教材專著
