發布時間：2018-05-29 10:04

  本文選題：機械設計 + D打印　； 參考：《吉林大學學報(工學版)》2017年05期

【摘要】：為了解決當前3D打印制造過程中一些具有懸臂或者空腔結構又不允許添加內部支撐結構的打印件無法制造的問題,設計出一種工作平臺可翻轉的3D打印機,介紹了其結構組成以及工作原理;通過對系統模型進行運動學分析,得到工作平臺機構運動學正解與逆解,為結構的速度分析和運動控制等研究提供了基礎。利用ANSYS仿真軟件對系統建立仿真模型,得到工作平臺結構和噴頭結構的應力與模態分析,驗證了設計方案的可行性。實現了工作平臺可翻轉的可能性,完成無支撐結構的曲面結構打印。
[Abstract]:In order to solve the problem that some printing parts with cantilever or cavity structure but not allowed to add internal supporting structure can not be manufactured in the current 3D printing process, a 3D printer with a work platform that can be flipped is designed. Through kinematics analysis of the system model, the forward and inverse kinematics solutions of the working platform mechanism are obtained, which provides the basis for the research of velocity analysis and motion control of the structure. The simulation model of the system is established by using the ANSYS simulation software, and the stress and modal analysis of the work platform structure and the nozzle structure are obtained, and the feasibility of the design scheme is verified. The possibility that the work platform can be flipped is realized, and the surface structure printing without supporting structure is completed.
【作者單位】： 吉林大學機械科學與工程學院;
【基金】：國家自然科學基金項目(51135006,51505185)
【分類號】：TP391.73
，

本文編號：1950468